Pana Lake Dam, Illinois, USA

Home / USA / Illinois / Pana Lake Dam

Quick Facts About Pana Lake Dam

Location: Shelby, Illinois
Coordinates: 39.36522, -89.02186
River: Becks Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1920
Dam Height: 53 ft (16 m)
Dam Length: 800 ft (244 m)
Dam Capacity: 6,004 acre-ft (7,406 Ml)
Hazard Potential: Significant
Condition Assessment: Not Available

Pana Lake Dam Map

Here is a map of Pana Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Pana Lake Dam Information

Pana Lake Dam is an earthen embankment dam located about 47 miles from Vandalia, Shelby, Illinois.

The dam, which is on the Becks Creek River, was primarily built for Recreation purposes, but also serves for Water Supply benefits.

The dam was designed by ENGINEERING SERVICE CORP. and commissioned in 1920 and is currently owned by CITY OF PANA.

Pana Lake Dam Structure

The Pana Lake Dam is approximately 800 feet (244 m) long, 53 feet (16 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Pana Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,297 acre-ft (4,067 Ml) and maximum capacity of 6,004 acre-ft (7,406 Ml).

The surface area of the reservoir is 241 acres (98 ha) and the total catchment area is 9 square miles (22 square kilometres).

Pana Lake Dam Spillway

The dam has a 155 feet (47 m) wide uncontrolled spillway with a maximum discharge capacity of 16650 cubic feet per second (471 cubic metres per second).

Pana Lake Dam Compared to Four Famous American Dams

Pana Lake Dam
Shelby, Illinois
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 53 730 550 357 216
Length (Ft) 800 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,004 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 9 167,800 74,100 3,611 108,355

Pana Lake Dam Weather

Current Conditions at Pana Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Pana Lake Dam

Failed to fetch weather forecast data.

Pana Lake Dam Frequently Asked Questions

In which state is the Pana Lake Dam?

Pana Lake Dam is in Illinois.

In which county is the Pana Lake Dam?

Pana Lake Dam is in Shelby County.

How high is the Pana Lake Dam?

Pana Lake Dam is 53 feet high.

How long is the Pana Lake Dam?

Pana Lake Dam is 800 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG