{{mpg_dam_name}}

Mississippi River Lock and Dam 10 Quick Facts

Location: Clayton, Iowa
Coordinates: 42.785797, -91.0934294
River: Mississippi River
Primary Purpose: Navigation
Type: Concrete Earth
Commissioned: 1937
Dam Height: 20 ft (6 m)
Dam Length: 6,788 ft (2,069 m)
Dam Capacity: 212,000 acre-ft (261,498 Ml)
Hazard Potential: Significant
Condition Assessment: Not Available
Share Mississippi River Lock and Dam 10:

Mississippi River Lock and Dam 10 Map

Mississippi River Lock and Dam 10 Information

Mississippi River Lock and Dam 10 is a concrete earth dam located about 1 miles from Guttenberg, Clayton, Iowa.

The dam, which is on the Mississippi River, was primarily built for Navigation purposes, but also serves for Recreation benefits.

The dam was designed by CEMVP and commissioned in 1937 and is currently owned by USACE – St. Paul District.

Mississippi River Lock and Dam 10 Structure

The Mississippi River Lock and Dam 10 is approximately 6,788 feet (2,069 m) long, 20 feet (6 m) high and has a structural volume of 356,500 cubic yards (272,564 cubic metres).

Mississippi River Lock and Dam 10 Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 155,000 acre-ft (191,189 Ml) and maximum capacity of 212,000 acre-ft (261,498 Ml).

The surface area of the reservoir is 17,070 acres (6,908 ha) and the total catchment area is 79,370 square miles (205,568 square kilometres).

Mississippi River Lock and Dam 10 Spillway

The dam has a 5582 feet (1701 m) wide controlled spillway with a maximum discharge capacity of 308000 cubic feet per second (8722 cubic metres per second).

Mississippi River Lock and Dam 10 Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Mississippi River Lock and Dam 10
Clayton, Iowa
Height (ft)
20
Length (Ft)
6,788
Storage Volume (acre-ft)
212,000
Drainage Area (sq miles)
79,370
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Mississippi River Lock and Dam 10 Weather

Current Conditions at Mississippi River Lock and Dam 10

Parameter Value
Current Time 00:11
Sunrise 07:19
Sunset 16:30
Temperature (°F) 29
Feels Like (°F) 18
Cloud Coverage (%) 49
Pressure (inHg) 1015
Humidity (%) 80
Wind Speed (mph) 13
Rain (mm) 0

7-Day Forecast for Mississippi River Lock and Dam 10

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 12 39 28 1008 76 25 42 WNW 84 - light snow
Thu 12 23 6 1031 59 19 34 NW 0 - few clouds
Fri 15 33 18 1027 43 10 19 WSW 0 - broken clouds
Sat 25 40 32 1021 60 14 39 SW 0 - clear sky
Sun 38 48 38 1008 94 16 39 SSW 20 0 light rain
Mon 40 49 44 1005 82 12 28 NW 20 0 light rain
Tue 25 34 18 1020 50 15 25 NW 0 - few clouds
Wed 27 37 29 1017 53 10 27 SW 0 - broken clouds

Mississippi River Lock and Dam 10 Frequently Asked Questions

In which state is the Mississippi River Lock and Dam 10?

Mississippi River Lock and Dam 10 is in Iowa.

In which county is the Mississippi River Lock and Dam 10?

Mississippi River Lock and Dam 10 is in Clayton County.

How high is the Mississippi River Lock and Dam 10?

Mississippi River Lock and Dam 10 is 20 feet high.

How long is the Mississippi River Lock and Dam 10?

Mississippi River Lock and Dam 10 is 6,788 feet long.

Share Mississippi River Lock and Dam 10:

More Dams in Clayton County:

Mississippi River Lock and Dam 10

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG