Virden Creek Dam, Iowa, USA

Home / USA / Iowa / Virden Creek Dam

Quick Facts About Virden Creek Dam

Location: Black Hawk, Iowa
Coordinates: 42.5458, -92.3121
River: Virden Creek River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1979
Dam Height: 39 ft (12 m)
Dam Length: 3,040 ft (927 m)
Dam Capacity: 8,300 acre-ft (10,238 Ml)
Condition Assessment: Satisfactory

Virden Creek Dam Map

Here is a map of Virden Creek Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Virden Creek Dam Information

Virden Creek Dam is an earthen embankment dam located about 1 miles from Waterloo, Black Hawk, Iowa.

The dam, which is on the Virden Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by DAEN NCR and commissioned in 1979 and is currently owned by City of Waterloo.

Virden Creek Dam Structure

The Virden Creek Dam is approximately 3,040 feet (927 m) long, 39 feet (12 m) high and has a structural volume of 401,500 cubic yards (306,969 cubic metres).

Virden Creek Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 8,300 acre-ft (10,238 Ml).

The surface area of the reservoir is 0 acres (0 ha) and the total catchment area is 9 square miles (22 square kilometres).

Virden Creek Dam Spillway

The dam has a 156 feet (48 m) wide uncontrolled spillway with a maximum discharge capacity of 0 cubic feet per second (0 cubic metres per second).

Virden Creek Dam Compared to Four Famous American Dams

Virden Creek Dam
Black Hawk, Iowa
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 39 730 550 357 216
Length (Ft) 3,040 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,300 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 9 167,800 74,100 3,611 108,355

Virden Creek Dam Weather

Current Conditions at Virden Creek Dam

Parameter Value
Current Time 21:39
Sunrise 06:35
Sunset 19:42
Temperature (°F) 77
Feels Like (°F) 79
Cloud Coverage (%) 0
Pressure (inHg) 1011
Humidity (%) 88
Wind Speed (mph) 3
Rain (mm) 0

7-Day Forecast for Virden Creek Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 71 90 95 1013 59 10 18 E 0 - scattered clouds
Thu 70 94 100 1010 49 15 29 SE 100 3 light rain
Fri 72 96 95 1010 46 10 22 SSW 100 4 light rain
Sat 70 93 95 1012 47 11 26 E 20 0 light rain
Sun 67 83 84 1016 66 16 35 SE 100 1 light rain
Mon 65 84 83 1014 57 19 39 SE 90 1 light rain
Tue 77 103 94 1010 44 17 44 SSE 0 - broken clouds
Wed 71 84 84 1017 62 15 28 N 20 0 light rain

Virden Creek Dam Frequently Asked Questions

In which state is the Virden Creek Dam?

Virden Creek Dam is in Iowa.

In which county is the Virden Creek Dam?

Virden Creek Dam is in Black Hawk County.

How high is the Virden Creek Dam?

Virden Creek Dam is 39 feet high.

How long is the Virden Creek Dam?

Virden Creek Dam is 3,040 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG