Fall River Dam, Kansas, USA

Home / USA / Kansas / Fall River Dam

Quick Facts About Fall River Dam

Location: Greenwood, Kansas
Coordinates: 37.650833, -96.0629066
River: Fall River
Primary Purpose: Flood Risk Reduction
Type: Gravity Earth
Commissioned: 1948
Dam Height: 94 ft (29 m)
Dam Length: 6,015 ft (1,833 m)
Dam Capacity: 256,400 acre-ft (316,264 Ml)
Condition Assessment: Not Available

Fall River Dam Map

Here is a map of Fall River Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Fall River Dam Information

Fall River Dam is a gravity earth dam located in Fall River, Greenwood, Kansas.

The dam, which is on the Fall River, was primarily built for Flood Risk Reduction purposes, but also serves for Water Supply benefits.

The dam was designed by CESWT and commissioned in 1948 and is currently owned by USACE – Tulsa District.

Fall River Dam Structure

The Fall River Dam is approximately 6,015 feet (1,833 m) long, 94 feet (29 m) high and has a structural volume of 3,600,000 cubic yards (2,752,398 cubic metres).

Fall River Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 22,627 acre-ft (27,910 Ml) and maximum capacity of 256,400 acre-ft (316,264 Ml).

The surface area of the reservoir is 2,329 acres (943 ha) and the total catchment area is 585 square miles (1,515 square kilometres).

Fall River Dam Spillway

The dam has a 400 feet (122 m) wide controlled spillway with a maximum discharge capacity of 229000 cubic feet per second (6485 cubic metres per second).

Fall River Dam Compared to Four Famous American Dams

Fall River Dam
Greenwood, Kansas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 94 730 550 357 216
Length (Ft) 6,015 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 256,400 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 585 167,800 74,100 3,611 108,355

Fall River Dam Weather

Current Conditions at Fall River Dam

Failed to fetch current weather data.

7-Day Forecast for Fall River Dam

Failed to fetch weather forecast data.

Fall River Dam Frequently Asked Questions

In which state is the Fall River Dam?

Fall River Dam is in Kansas.

In which county is the Fall River Dam?

Fall River Dam is in Greenwood County.

How high is the Fall River Dam?

Fall River Dam is 94 feet high.

How long is the Fall River Dam?

Fall River Dam is 6,015 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG