John Redmond Dam

John Redmond Dam Quick Facts

Location: Coffey, Kansas
Coordinates: 38.242243, -95.755669
River: Grand Neosho River
Primary Purpose: Flood Risk Reduction
Type: Gravity Earth
Commissioned: 1964
Dam Height: 87 ft (27 m)
Dam Length: 21,790 ft (6,642 m)
Dam Capacity: 626,007 acre-ft (772,167 Ml)
Condition Assessment: Not Available
Share John Redmond Dam:

John Redmond Dam Map

John Redmond Dam Information

John Redmond Dam is a gravity earth dam located in Burlington, Coffey, Kansas.

The dam, which is on the Grand Neosho River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation and Water Supply benefits.

The dam was designed by CESWT and commissioned in 1964 and is currently owned by USACE – Tulsa District.

John Redmond Dam Structure

The John Redmond Dam is approximately 21,790 feet (6,642 m) long, 87 feet (27 m) high and has a structural volume of 5,028,810 cubic yards (3,844,802 cubic metres).

John Redmond Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 60,661 acre-ft (74,824 Ml) and maximum capacity of 626,007 acre-ft (772,167 Ml).

The surface area of the reservoir is 9,671 acres (3,914 ha) and the total catchment area is 3,015 square miles (7,809 square kilometres).

John Redmond Dam Spillway

The dam has a 560 feet (171 m) wide controlled spillway with a maximum discharge capacity of 578000 cubic feet per second (16367 cubic metres per second).

John Redmond Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
John Redmond Dam
Coffey, Kansas
Height (ft)
87
Length (Ft)
21,790
Storage Volume (acre-ft)
626,007
Drainage Area (sq miles)
3,015
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

John Redmond Dam Weather

Current Conditions at John Redmond Dam

Failed to fetch current weather data.

7-Day Forecast for John Redmond Dam

Failed to fetch weather forecast data.

John Redmond Dam Frequently Asked Questions

In which state is the John Redmond Dam?

John Redmond Dam is in Kansas.

In which county is the John Redmond Dam?

John Redmond Dam is in Coffey County.

How high is the John Redmond Dam?

John Redmond Dam is 87 feet high.

How long is the John Redmond Dam?

John Redmond Dam is 21,790 feet long.

Share John Redmond Dam:

More Dams in Coffey County:

John Redmond Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG