Marion Dam, Kansas, USA

Home / USA / Kansas / Marion Dam

Quick Facts About Marion Dam

Location: Marion, Kansas
Coordinates: 38.369121, -97.0847367
River: Cottonwood River
Primary Purpose: Flood Risk Reduction
Type: Gravity Earth
Commissioned: 1968
Dam Height: 67 ft (20 m)
Dam Length: 8,375 ft (2,553 m)
Dam Capacity: 189,200 acre-ft (233,374 Ml)
Condition Assessment: Not Available

Marion Dam Map

Here is a map of Marion Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Marion Dam Information

Marion Dam is a gravity earth dam located in Marion, Marion, Kansas.

The dam, which is on the Cottonwood River, was primarily built for Flood Risk Reduction purposes, but also serves for Recreation and Water Supply benefits.

The dam was designed by CESWT and commissioned in 1968 and is currently owned by USACE – Tulsa District.

Marion Dam Structure

The Marion Dam is approximately 8,375 feet (2,553 m) long, 67 feet (20 m) high and has a structural volume of 1,292,157 cubic yards (987,925 cubic metres).

Marion Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 80,680 acre-ft (99,517 Ml) and maximum capacity of 189,200 acre-ft (233,374 Ml).

The surface area of the reservoir is 6,210 acres (2,513 ha) and the total catchment area is 200 square miles (518 square kilometres).

Marion Dam Spillway

The dam has a 136 feet (41 m) wide controlled spillway with a maximum discharge capacity of 132000 cubic feet per second (3738 cubic metres per second).

Marion Dam Compared to Four Famous American Dams

Marion Dam
Marion, Kansas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 67 730 550 357 216
Length (Ft) 8,375 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 189,200 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 200 167,800 74,100 3,611 108,355

Marion Dam Weather

Current Conditions at Marion Dam

Failed to fetch current weather data.

7-Day Forecast for Marion Dam

Failed to fetch weather forecast data.

Marion Dam Frequently Asked Questions

In which state is the Marion Dam?

Marion Dam is in Kansas.

In which county is the Marion Dam?

Marion Dam is in Marion County.

How high is the Marion Dam?

Marion Dam is 67 feet high.

How long is the Marion Dam?

Marion Dam is 8,375 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG