Santa Fe Lake Dam, Kansas, USA

Home / USA / Kansas / Santa Fe Lake Dam

Quick Facts About Santa Fe Lake Dam

Location: Butler, Kansas
Coordinates: 37.704077, -97.047196
River: Dry Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1927
Dam Height: 38 ft (12 m)
Dam Length: 1,100 ft (335 m)
Dam Capacity: 8,650 acre-ft (10,670 Ml)

Santa Fe Lake Dam Map

Here is a map of Santa Fe Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Santa Fe Lake Dam Information

Santa Fe Lake Dam is an earthen embankment dam located about 4 miles from Augusta, Butler, Kansas.

The dam, which is on the Dry Creek River, was primarily built for Recreation purposes, but also serves for Water Supply benefits.

The dam was designed by UNKNOWN, and commissioned in 1927 and is currently owned by AUGUSTA, CITY OF.

Santa Fe Lake Dam Structure

The Santa Fe Lake Dam is approximately 1,100 feet (335 m) long, 38 feet (12 m) high and has a structural volume of cubic yards (0 cubic metres).

Santa Fe Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 8,650 acre-ft (10,670 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is 37 square miles (96 square kilometres).

Santa Fe Lake Dam Spillway

The dam spillway has a maximum discharge capacity of 24150 cubic feet per second (684 cubic metres per second).

Santa Fe Lake Dam Compared to Four Famous American Dams

Santa Fe Lake Dam
Butler, Kansas
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 38 730 550 357 216
Length (Ft) 1,100 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,650 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 37 167,800 74,100 3,611 108,355

Santa Fe Lake Dam Weather

Current Conditions at Santa Fe Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Santa Fe Lake Dam

Failed to fetch weather forecast data.

Santa Fe Lake Dam Frequently Asked Questions

In which state is the Santa Fe Lake Dam?

Santa Fe Lake Dam is in Kansas.

In which county is the Santa Fe Lake Dam?

Santa Fe Lake Dam is in Butler County.

How high is the Santa Fe Lake Dam?

Santa Fe Lake Dam is 38 feet high.

How long is the Santa Fe Lake Dam?

Santa Fe Lake Dam is 1,100 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG