Taylor Fork Lake Dam, Kentucky, USA

Home / USA / Kentucky / Taylor Fork Lake Dam

Quick Facts About Taylor Fork Lake Dam

Location: Madison, Kentucky
Coordinates: 37.70367, -84.35703
River: Silver Creek River
Primary Purpose: Recreation
Type: Earth Rockfill
Commissioned: 1966
Dam Height: 76 ft (23 m)
Dam Length: 670 ft (204 m)
Dam Capacity: 8,320 acre-ft (10,262 Ml)

Taylor Fork Lake Dam Map

Here is a map of Taylor Fork Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Taylor Fork Lake Dam Information

Taylor Fork Lake Dam is an earth rockfill dam located about 8 miles from Ruthton, Madison, Kentucky.

The dam, which is on the Silver Creek River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by DEPARTMENT OF NATURAL RESOURCES and commissioned in 1966 and is currently owned by MADISON COUNTY FISCAL COURT.

Taylor Fork Lake Dam Structure

The Taylor Fork Lake Dam is approximately 670 feet (204 m) long, 76 feet (23 m) high and has a structural volume of cubic yards (0 cubic metres).

Taylor Fork Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,572 acre-ft (4,406 Ml) and maximum capacity of 8,320 acre-ft (10,262 Ml).

The surface area of the reservoir is 169 acres (68 ha) and the total catchment area is 14 square miles (36 square kilometres).

Taylor Fork Lake Dam Spillway

The dam has a 150 feet (46 m) wide uncontrolled spillway with a maximum discharge capacity of cubic feet per second (0 cubic metres per second).

Taylor Fork Lake Dam Compared to Four Famous American Dams

Taylor Fork Lake Dam
Madison, Kentucky
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 76 730 550 357 216
Length (Ft) 670 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,320 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 14 167,800 74,100 3,611 108,355

Taylor Fork Lake Dam Weather

Current Conditions at Taylor Fork Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Taylor Fork Lake Dam

Failed to fetch weather forecast data.

Taylor Fork Lake Dam Frequently Asked Questions

In which state is the Taylor Fork Lake Dam?

Taylor Fork Lake Dam is in Kentucky.

In which county is the Taylor Fork Lake Dam?

Taylor Fork Lake Dam is in Madison County.

How high is the Taylor Fork Lake Dam?

Taylor Fork Lake Dam is 76 feet high.

How long is the Taylor Fork Lake Dam?

Taylor Fork Lake Dam is 670 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG