Danforth Dam, Maine, USA

Home / USA / Maine / Danforth Dam

Quick Facts About Danforth Dam

Location: Washington, Maine
Coordinates: 45.659076, -67.868869
River: Baskehegan River
Primary Purpose: Water Supply
Type: Concrete
Commissioned: 1845
Dam Height: 16 ft (5 m)
Dam Length: 160 ft (49 m)
Dam Capacity: 93,952 acre-ft (115,888 Ml)

Danforth Dam Map

Here is a map of Danforth Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Danforth Dam Information

Danforth Dam is a concrete dam located in Danforth, Washington, Maine.

The dam, which is on the Baskehegan River, was primarily built for Water Supply purposes, but also serves for Flood Risk Reduction benefits.

The dam was designed by and commissioned in 1845 and is currently owned by Baskahegan Dam Co..

Danforth Dam Structure

The Danforth Dam is approximately 160 feet (49 m) long, 16 feet (5 m) high and has a structural volume of cubic yards (0 cubic metres).

Danforth Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 22,912 acre-ft (28,261 Ml) and maximum capacity of 93,952 acre-ft (115,888 Ml).

The surface area of the reservoir is 1,645 acres (666 ha) and the total catchment area is 178 square miles (461 square kilometres).

Danforth Dam Spillway

According to the latest available data, the Danforth Dam does not have any spillways.

Danforth Dam Compared to Four Famous American Dams

Danforth Dam
Washington, Maine
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 16 730 550 357 216
Length (Ft) 160 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 93,952 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 178 167,800 74,100 3,611 108,355

Danforth Dam Weather

Current Conditions at Danforth Dam

Failed to fetch current weather data.

7-Day Forecast for Danforth Dam

Failed to fetch weather forecast data.

Danforth Dam Frequently Asked Questions

In which state is the Danforth Dam?

Danforth Dam is in Maine.

In which county is the Danforth Dam?

Danforth Dam is in Washington County.

How high is the Danforth Dam?

Danforth Dam is 16 feet high.

How long is the Danforth Dam?

Danforth Dam is 160 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG