Graham Lake Dam

Graham Lake Dam Quick Facts

Location: Hancock, Maine
Coordinates: 44.590954, -68.44067
River: Union River
Primary Purpose: Hydroelectric
Type: Concrete Earth Gravity
Commissioned: 1924
Dam Height: 43 ft (13 m)
Dam Length: 630 ft (192 m)
Dam Capacity: 130,000 acre-ft (160,352 Ml)
Condition Assessment: Satisfactory
Share Graham Lake Dam:

Graham Lake Dam Map

Graham Lake Dam Information

Graham Lake Dam is a concrete earth gravity dam located about 4 miles from Ellsworth, Hancock, Maine.

The dam, which is on the Union River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1924 and is currently owned by Black Bear Hydro Partners, LLC.

Graham Lake Dam Structure

The Graham Lake Dam is approximately 630 feet (192 m) long, 43 feet (13 m) high and has a structural volume of cubic yards (0 cubic metres).

Graham Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 130,000 acre-ft (160,352 Ml) and maximum capacity of 130,000 acre-ft (160,352 Ml).

The surface area of the reservoir is 10,300 acres (4,168 ha) and the total catchment area is 499 square miles (1,292 square kilometres).

Graham Lake Dam Spillway

The dam has a 80 feet (24 m) wide controlled spillway with a maximum discharge capacity of 24000 cubic feet per second (680 cubic metres per second).

Graham Lake Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Graham Lake Dam
Hancock, Maine
Height (ft)
43
Length (Ft)
630
Storage Volume (acre-ft)
130,000
Drainage Area (sq miles)
499
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Graham Lake Dam Weather

Current Conditions at Graham Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Graham Lake Dam

Failed to fetch weather forecast data.

Graham Lake Dam Frequently Asked Questions

In which state is the Graham Lake Dam?

Graham Lake Dam is in Maine.

In which county is the Graham Lake Dam?

Graham Lake Dam is in Hancock County.

How high is the Graham Lake Dam?

Graham Lake Dam is 43 feet high.

How long is the Graham Lake Dam?

Graham Lake Dam is 630 feet long.

Share Graham Lake Dam:

More Dams in Hancock County:

Branch Lake Dam
Craig Pond Dam
Findlay Upground Reservoir No. 2 Dam
Graham Lake Dam
Green Lake Dam
Little Rocky Run Lake Dam
Lower Lead Mountain Dam
Nicatous Stream Dam
Philips Lake Dam
Silver Lake Dam
Toddy Pond Dam
Wallace Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG