Swan Lake Dam, Maine, USA

Home / USA / Maine / Swan Lake Dam

Quick Facts About Swan Lake Dam

Location: Waldo, Maine
Coordinates: 44.5214, -68.997259
River: Goose River
Primary Purpose:
Type: Concrete Masonry Gravity
Commissioned: 1900
Dam Height: 10 ft (3 m)
Dam Length: 250 ft (76 m)
Dam Capacity: 11,270 acre-ft (13,901 Ml)
Hazard Potential: Significant
Condition Assessment: Satisfactory

Swan Lake Dam Map

Here is a map of Swan Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Swan Lake Dam Information

Swan Lake Dam is a concrete masonry gravity dam located in Swanville, Waldo, Maine.

The dam, which is on the Goose River, was primarily built for purposes, but also serves for benefits.

The dam was designed by and commissioned in 1900 and is currently owned by Town of Swanville.

Swan Lake Dam Structure

The Swan Lake Dam is approximately 250 feet (76 m) long, 10 feet (3 m) high and has a structural volume of cubic yards (0 cubic metres).

Swan Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 7,500 acre-ft (9,251 Ml) and maximum capacity of 11,270 acre-ft (13,901 Ml).

The surface area of the reservoir is 1,510 acres (611 ha) and the total catchment area is 10 square miles (26 square kilometres).

Swan Lake Dam Spillway

The dam spillway has a maximum discharge capacity of 90 cubic feet per second (3 cubic metres per second).

Swan Lake Dam Compared to Four Famous American Dams

Swan Lake Dam
Waldo, Maine
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 10 730 550 357 216
Length (Ft) 250 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 11,270 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 10 167,800 74,100 3,611 108,355

Swan Lake Dam Weather

Current Conditions at Swan Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Swan Lake Dam

Failed to fetch weather forecast data.

Swan Lake Dam Frequently Asked Questions

In which state is the Swan Lake Dam?

Swan Lake Dam is in Maine.

In which county is the Swan Lake Dam?

Swan Lake Dam is in Waldo County.

How high is the Swan Lake Dam?

Swan Lake Dam is 10 feet high.

How long is the Swan Lake Dam?

Swan Lake Dam is 250 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG