Wilson Pond Dam, Maine, USA

Home / USA / Maine / Wilson Pond Dam

Quick Facts About Wilson Pond Dam

Location: Franklin, Maine
Coordinates: 44.585862, -70.233123
River: Wilson Pond River
Primary Purpose: Recreation
Type: Rockfill Earth
Commissioned: 1845
Dam Height: 24 ft (7 m)
Dam Length: 78 ft (24 m)
Dam Capacity: 13,610 acre-ft (16,788 Ml)

Wilson Pond Dam Map

Here is a map of Wilson Pond Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Wilson Pond Dam Information

Wilson Pond Dam is a rockfill earth dam located in Wilton, Franklin, Maine.

The dam, which is on the Wilson Pond River, was primarily built for Recreation purposes, but also serves for Fire Protection, Stock, Or Small Fish Pond and Other benefits.

The dam was designed by and commissioned in 1845 and is currently owned by Wilton.

Wilson Pond Dam Structure

The Wilson Pond Dam is approximately 78 feet (24 m) long, 24 feet (7 m) high and has a structural volume of cubic yards (0 cubic metres).

Wilson Pond Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 11,010 acre-ft (13,581 Ml) and maximum capacity of 13,610 acre-ft (16,788 Ml).

The surface area of the reservoir is 594 acres (240 ha) and the total catchment area is 27 square miles (70 square kilometres).

Wilson Pond Dam Spillway

According to the latest available data, the Wilson Pond Dam does not have any spillways.

Wilson Pond Dam Compared to Four Famous American Dams

Wilson Pond Dam
Franklin, Maine
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 24 730 550 357 216
Length (Ft) 78 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 13,610 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 27 167,800 74,100 3,611 108,355

Wilson Pond Dam Weather

Current Conditions at Wilson Pond Dam

Failed to fetch current weather data.

7-Day Forecast for Wilson Pond Dam

Failed to fetch weather forecast data.

Wilson Pond Dam Frequently Asked Questions

In which state is the Wilson Pond Dam?

Wilson Pond Dam is in Maine.

In which county is the Wilson Pond Dam?

Wilson Pond Dam is in Franklin County.

How high is the Wilson Pond Dam?

Wilson Pond Dam is 24 feet high.

How long is the Wilson Pond Dam?

Wilson Pond Dam is 78 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG