Sherman Dam, Massachusetts, USA

Home / USA / Massachusetts / Sherman Dam

Quick Facts About Sherman Dam

Location: Franklin, Massachusetts
Coordinates: 42.7299, -72.9298
River: Deerfield River
Primary Purpose: Hydroelectric
Type: Other Concrete Earth
Commissioned: 1927
Dam Height: 110 ft (34 m)
Dam Length: 989 ft (301 m)
Dam Capacity: 5,480 acre-ft (6,759 Ml)
Condition Assessment: Satisfactory

Sherman Dam Map

Here is a map of Sherman Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Sherman Dam Information

Sherman Dam is an other concrete earth dam located about 1 miles from Monroe Bridge, Franklin, Massachusetts.

The dam, which is on the Deerfield River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1927 and is currently owned by Great River Hydro, LLC.

Sherman Dam Structure

The Sherman Dam is approximately 989 feet (301 m) long, 110 feet (34 m) high and has a structural volume of cubic yards (0 cubic metres).

Sherman Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,480 acre-ft (6,759 Ml) and maximum capacity of 5,480 acre-ft (6,759 Ml).

The surface area of the reservoir is 218 acres (88 ha) and the total catchment area is 236 square miles (611 square kilometres).

Sherman Dam Spillway

The dam has a 207 feet (63 m) wide uncontrolled spillway with a maximum discharge capacity of 87000 cubic feet per second (2464 cubic metres per second).

Sherman Dam Compared to Four Famous American Dams

Sherman Dam
Franklin, Massachusetts
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 110 730 550 357 216
Length (Ft) 989 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,480 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 236 167,800 74,100 3,611 108,355

Sherman Dam Weather

Current Conditions at Sherman Dam

Failed to fetch current weather data.

7-Day Forecast for Sherman Dam

Failed to fetch weather forecast data.

Sherman Dam Frequently Asked Questions

In which state is the Sherman Dam?

Sherman Dam is in Massachusetts.

In which county is the Sherman Dam?

Sherman Dam is in Franklin County.

How high is the Sherman Dam?

Sherman Dam is 110 feet high.

How long is the Sherman Dam?

Sherman Dam is 989 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG