Denton Creek Flooding Dam, Michigan, USA

Home / USA / Michigan / Denton Creek Flooding Dam

Quick Facts About Denton Creek Flooding Dam

Location: Roscommon, Michigan
Coordinates: 44.279377, -84.5777672
River: Denton Creek River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1954
Dam Height: 11 ft (3 m)
Dam Length: 250 ft (76 m)
Dam Capacity: 18,000 acre-ft (22,203 Ml)
Hazard Potential: Significant

Denton Creek Flooding Dam Map

Here is a map of Denton Creek Flooding Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Denton Creek Flooding Dam Information

Denton Creek Flooding Dam is an earthen embankment dam located about 4 miles from Prudenville, Roscommon, Michigan.

The dam, which is on the Denton Creek River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1954 and is currently owned by MDNR Wildlife.

Denton Creek Flooding Dam Structure

The Denton Creek Flooding Dam is approximately 250 feet (76 m) long, 11 feet (3 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Denton Creek Flooding Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 540 acre-ft (666 Ml) and maximum capacity of 18,000 acre-ft (22,203 Ml).

The surface area of the reservoir is 270 acres (109 ha) and the total catchment area is 15 square miles (38 square kilometres).

Denton Creek Flooding Dam Spillway

The dam has a 321 feet (98 m) wide uncontrolled spillway with a maximum discharge capacity of 820 cubic feet per second (23 cubic metres per second).

Denton Creek Flooding Dam Compared to Four Famous American Dams

Denton Creek Flooding Dam
Roscommon, Michigan
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 11 730 550 357 216
Length (Ft) 250 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 18,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 15 167,800 74,100 3,611 108,355

Denton Creek Flooding Dam Weather

Current Conditions at Denton Creek Flooding Dam

Failed to fetch current weather data.

7-Day Forecast for Denton Creek Flooding Dam

Failed to fetch weather forecast data.

Denton Creek Flooding Dam Frequently Asked Questions

In which state is the Denton Creek Flooding Dam?

Denton Creek Flooding Dam is in Michigan.

In which county is the Denton Creek Flooding Dam?

Denton Creek Flooding Dam is in Roscommon County.

How high is the Denton Creek Flooding Dam?

Denton Creek Flooding Dam is 11 feet high.

How long is the Denton Creek Flooding Dam?

Denton Creek Flooding Dam is 250 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG