Sanford Dam, Michigan, USA

Quick Facts About Sanford Dam

Location: Midland, Michigan
Coordinates: 43.677206, -84.380119
River: Tittawabassee River
Primary Purpose: Recreation
Type: Concrete Multi-Arch
Commissioned: 1925
Dam Height: 36 ft (11 m)
Dam Length: 1,600 ft (488 m)
Dam Capacity: 15,000 acre-ft (18,502 Ml)
Condition Assessment: Unsatisfactory

Sanford Dam Map

Here is a map of Sanford Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Sanford Dam Information

Sanford Dam is a concrete multi-arch dam located in Sanford, Midland, Michigan.

The dam, which is on the Tittawabassee River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by HOLLAND, ACKERMAN & HOLLAND and commissioned in 1925 and is currently owned by Midland County.

Sanford Dam Structure

The Sanford Dam is approximately 1,600 feet (488 m) long, 36 feet (11 m) high and has a structural volume of cubic yards (0 cubic metres).

Sanford Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 15,000 acre-ft (18,502 Ml) and maximum capacity of 15,000 acre-ft (18,502 Ml).

The surface area of the reservoir is 1,526 acres (618 ha) and the total catchment area is 1,020 square miles (2,642 square kilometres).

Sanford Dam Spillway

The dam has a 139 feet (42 m) wide controlled spillway with a maximum discharge capacity of 31000 cubic feet per second (878 cubic metres per second).

Sanford Dam Compared to Four Famous American Dams

Sanford Dam
Midland, Michigan
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 36 730 550 357 216
Length (Ft) 1,600 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 15,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,020 167,800 74,100 3,611 108,355

Sanford Dam Weather

Current Conditions at Sanford Dam

Parameter Value
Current Time 19:49
Sunrise 07:24
Sunset 17:18
Temperature (°F) 30
Feels Like (°F) 21
Cloud Coverage (%) 0
Pressure (inHg) 1020
Humidity (%) 69
Wind Speed (mph) 10
Rain (mm) 0

7-Day Forecast for Sanford Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 29 37 29 1014 50 16 29 NNE 100 2 light rain
Mon 24 34 22 1019 27 14 26 N 0 - clear sky
Tue 27 39 30 1011 55 16 31 SSW 0 - overcast clouds
Wed 30 42 33 1006 85 16 30 WNW 0 - overcast clouds
Thu 33 47 40 1016 46 14 28 WNW 0 - clear sky
Fri 38 53 50 1014 49 10 21 NE 0 - scattered clouds
Sat 36 42 34 1020 46 15 29 ESE 0 - overcast clouds
Sun 37 39 29 1005 69 20 35 ENE 100 15 moderate rain

Sanford Dam Frequently Asked Questions

In which state is the Sanford Dam?

Sanford Dam is in Michigan.

In which county is the Sanford Dam?

Sanford Dam is in Midland County.

How high is the Sanford Dam?

Sanford Dam is 36 feet high.

How long is the Sanford Dam?

Sanford Dam is 1,600 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG