Chippewa Dam, Minnesota, USA

Home / USA / Minnesota / Chippewa Dam

Quick Facts About Chippewa Dam

Location: Becker, Minnesota
Coordinates: 46.952, -95.61023
River: Otter Tail River
Primary Purpose: Fish and Wildlife Pond
Type: Earth
Commissioned: 1930
Dam Height: 12 ft (4 m)
Dam Length: 85 ft (26 m)
Dam Capacity: 7,650 acre-ft (9,436 Ml)

Chippewa Dam Map

Here is a map of Chippewa Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Chippewa Dam Information

Chippewa Dam is an earthen embankment dam located about 12 miles from Rochert, Becker, Minnesota.

The dam, which is on the Otter Tail River, was primarily built for Fish and Wildlife Pond purposes, but also serves for benefits.

The dam was designed by and commissioned in 1930 and is currently owned by USFWS.

Chippewa Dam Structure

The Chippewa Dam is approximately 85 feet (26 m) long, 12 feet (4 m) high and has a structural volume of cubic yards (0 cubic metres).

Chippewa Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 2,350 acre-ft (2,899 Ml) and maximum capacity of 7,650 acre-ft (9,436 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is 142 square miles (368 square kilometres).

Chippewa Dam Spillway

The dam spillway has a maximum discharge capacity of 850 cubic feet per second (24 cubic metres per second).

Chippewa Dam Compared to Four Famous American Dams

Chippewa Dam
Becker, Minnesota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 12 730 550 357 216
Length (Ft) 85 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,650 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 142 167,800 74,100 3,611 108,355

Chippewa Dam Weather

Current Conditions at Chippewa Dam

Failed to fetch current weather data.

7-Day Forecast for Chippewa Dam

Failed to fetch weather forecast data.

Chippewa Dam Frequently Asked Questions

In which state is the Chippewa Dam?

Chippewa Dam is in Minnesota.

In which county is the Chippewa Dam?

Chippewa Dam is in Becker County.

How high is the Chippewa Dam?

Chippewa Dam is 12 feet high.

How long is the Chippewa Dam?

Chippewa Dam is 85 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG