Lake Bronson Dam, Minnesota, USA

Home / USA / Minnesota / Lake Bronson Dam

Quick Facts About Lake Bronson Dam

Location: Kittson, Minnesota
Coordinates: 48.72301, -96.63422
River: Two Rivers South Branch
Primary Purpose: Flood Risk Reduction
Type: Gravity Earth
Commissioned: 1937
Dam Height: 36 ft (11 m)
Dam Length: 2,000 ft (610 m)
Dam Capacity: 6,000 acre-ft (7,401 Ml)

Lake Bronson Dam Map

Here is a map of Lake Bronson Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Lake Bronson Dam Information

Lake Bronson Dam is a gravity earth dam located about 2 miles from Lake Bronson, Kittson, Minnesota.

The dam, which is on the Two Rivers South Branch, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by and commissioned in 1937 and is currently owned by MNDNR-Parks.

Lake Bronson Dam Structure

The Lake Bronson Dam is approximately 2,000 feet (610 m) long, 36 feet (11 m) high and has a structural volume of cubic yards (0 cubic metres).

Lake Bronson Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,700 acre-ft (4,564 Ml) and maximum capacity of 6,000 acre-ft (7,401 Ml).

The surface area of the reservoir is 281 acres (114 ha) and the total catchment area is 540 square miles (1,399 square kilometres).

Lake Bronson Dam Spillway

The dam has a 66 feet (20 m) wide controlled spillway with a maximum discharge capacity of 4900 cubic feet per second (139 cubic metres per second).

Lake Bronson Dam Compared to Four Famous American Dams

Lake Bronson Dam
Kittson, Minnesota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 36 730 550 357 216
Length (Ft) 2,000 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 540 167,800 74,100 3,611 108,355

Lake Bronson Dam Weather

Current Conditions at Lake Bronson Dam

Failed to fetch current weather data.

7-Day Forecast for Lake Bronson Dam

Failed to fetch weather forecast data.

Lake Bronson Dam Frequently Asked Questions

In which state is the Lake Bronson Dam?

Lake Bronson Dam is in Minnesota.

In which county is the Lake Bronson Dam?

Lake Bronson Dam is in Kittson County.

How high is the Lake Bronson Dam?

Lake Bronson Dam is 36 feet high.

How long is the Lake Bronson Dam?

Lake Bronson Dam is 2,000 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG