Marsh Dam, Minnesota, USA

Home / USA / Minnesota / Marsh Dam

Quick Facts About Marsh Dam

Location: Swift, Minnesota
Coordinates: 45.171669, -96.09333
River: Minnesota River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1942
Dam Height: 9 ft (3 m)
Dam Length: 9,700 ft (2,957 m)
Dam Capacity: 91,000 acre-ft (112,247 Ml)
Condition Assessment: Not Available

Marsh Dam Map

Here is a map of Marsh Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Marsh Dam Information

Marsh Dam is an earthen embankment dam located about 24 miles from Montevideo, Swift, Minnesota.

The dam, which is on the Minnesota River, was primarily built for Flood Risk Reduction purposes, but also serves for Fish and Wildlife Pond, Recreation and Water Supply benefits.

The dam was designed by and commissioned in 1942 and is currently owned by USACE – St. Paul District.

Marsh Dam Structure

The Marsh Dam is approximately 9,700 feet (2,957 m) long, 9 feet (3 m) high and has a structural volume of 424,300 cubic yards (324,401 cubic metres).

Marsh Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 12,050 acre-ft (14,863 Ml) and maximum capacity of 91,000 acre-ft (112,247 Ml).

The surface area of the reservoir is 5,100 acres (2,064 ha) and the total catchment area is 2,800 square miles (7,252 square kilometres).

Marsh Dam Spillway

The dam has a 202 feet (62 m) wide uncontrolled spillway with a maximum discharge capacity of 2700 cubic feet per second (76 cubic metres per second).

Marsh Dam Compared to Four Famous American Dams

Marsh Dam
Swift, Minnesota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 9 730 550 357 216
Length (Ft) 9,700 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 91,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 2,800 167,800 74,100 3,611 108,355

Marsh Dam Weather

Current Conditions at Marsh Dam

Failed to fetch current weather data.

7-Day Forecast for Marsh Dam

Failed to fetch weather forecast data.

Marsh Dam Frequently Asked Questions

In which state is the Marsh Dam?

Marsh Dam is in Minnesota.

In which county is the Marsh Dam?

Marsh Dam is in Swift County.

How high is the Marsh Dam?

Marsh Dam is 9 feet high.

How long is the Marsh Dam?

Marsh Dam is 9,700 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG