Sandy Lock and Dam, Minnesota, USA

Home / USA / Minnesota / Sandy Lock and Dam

Quick Facts About Sandy Lock and Dam

Location: Aitkin, Minnesota
Coordinates: 46.787946, -93.3198493
River: Sandy River
Primary Purpose: Other
Type: Earth
Commissioned: 1895
Dam Height: 14 ft (4 m)
Dam Length: 109 ft (33 m)
Dam Capacity: 79,400 acre-ft (97,938 Ml)
Condition Assessment: Not Available

Sandy Lock and Dam Map

Here is a map of Sandy Lock and Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Sandy Lock and Dam Information

Sandy Lock and Dam is an earthen embankment dam located about 1 miles from Libby, Aitkin, Minnesota.

The dam, which is on the Sandy River, was primarily built for Other purposes, but also serves for Navigation, Fish and Wildlife Pond, Recreation, Water Supply and Flood Risk Reduction benefits.

The dam was designed by CEMVP and commissioned in 1895 and is currently owned by USACE – St. Paul District.

Sandy Lock and Dam Structure

The Sandy Lock and Dam is approximately 109 feet (33 m) long, 14 feet (4 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Sandy Lock and Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 38,000 acre-ft (46,872 Ml) and maximum capacity of 79,400 acre-ft (97,938 Ml).

The surface area of the reservoir is 9,400 acres (3,804 ha) and the total catchment area is 421 square miles (1,090 square kilometres).

Sandy Lock and Dam Spillway

The dam has a 66 feet (20 m) wide controlled spillway with a maximum discharge capacity of 3738 cubic feet per second (106 cubic metres per second).

Sandy Lock and Dam Compared to Four Famous American Dams

Sandy Lock and Dam
Aitkin, Minnesota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 14 730 550 357 216
Length (Ft) 109 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 79,400 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 421 167,800 74,100 3,611 108,355

Sandy Lock and Dam Weather

Current Conditions at Sandy Lock and Dam

Failed to fetch current weather data.

7-Day Forecast for Sandy Lock and Dam

Failed to fetch weather forecast data.

Sandy Lock and Dam Frequently Asked Questions

In which state is the Sandy Lock and Dam?

Sandy Lock and Dam is in Minnesota.

In which county is the Sandy Lock and Dam?

Sandy Lock and Dam is in Aitkin County.

How high is the Sandy Lock and Dam?

Sandy Lock and Dam is 14 feet high.

How long is the Sandy Lock and Dam?

Sandy Lock and Dam is 109 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG