Warren Storage Dam, Minnesota, USA

Home / USA / Minnesota / Warren Storage Dam

Quick Facts About Warren Storage Dam

Location: Marshall, Minnesota
Coordinates: 48.24199, -96.55703
River: Snake River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 2002
Dam Height: 26 ft (8 m)
Dam Length: 23,000 ft (7,010 m)
Dam Capacity: 7,000 acre-ft (8,634 Ml)
Hazard Potential: Significant
Condition Assessment: Satisfactory

Warren Storage Dam Map

Here is a map of Warren Storage Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Warren Storage Dam Information

Warren Storage Dam is an earthen embankment dam located about 21 miles from Warren, Marshall, Minnesota.

The dam, which is on the Snake River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by USDA NRCS and commissioned in 2002 and is currently owned by WD of Middle-Snake-Tamarac Rivers.

Warren Storage Dam Structure

The Warren Storage Dam is approximately 23,000 feet (7,010 m) long, 26 feet (8 m) high and has a structural volume of 1,100,000 cubic yards (841,011 cubic metres).

Warren Storage Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 50 acre-ft (62 Ml) and maximum capacity of 7,000 acre-ft (8,634 Ml).

The surface area of the reservoir is 5 acres (2 ha) and the total catchment area is 56 square miles (145 square kilometres).

Warren Storage Dam Spillway

The dam has a 10 feet (3 m) wide controlled spillway with a maximum discharge capacity of 4300 cubic feet per second (122 cubic metres per second).

Warren Storage Dam Compared to Four Famous American Dams

Warren Storage Dam
Marshall, Minnesota
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 26 730 550 357 216
Length (Ft) 23,000 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 56 167,800 74,100 3,611 108,355

Warren Storage Dam Weather

Current Conditions at Warren Storage Dam

Failed to fetch current weather data.

7-Day Forecast for Warren Storage Dam

Failed to fetch weather forecast data.

Warren Storage Dam Frequently Asked Questions

In which state is the Warren Storage Dam?

Warren Storage Dam is in Minnesota.

In which county is the Warren Storage Dam?

Warren Storage Dam is in Marshall County.

How high is the Warren Storage Dam?

Warren Storage Dam is 26 feet high.

How long is the Warren Storage Dam?

Warren Storage Dam is 23,000 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG