Bagnell Dam, Missouri, USA

Home / USA / Missouri / Bagnell Dam

Quick Facts About Bagnell Dam

Location: Miller, Missouri
Coordinates: 38.205111, -92.622437
River: Osage River
Primary Purpose: Hydroelectric
Type: Gravity
Commissioned: 1931
Dam Height: 148 ft (45 m)
Dam Length: 2,543 ft (775 m)
Dam Capacity: 2,677,000 acre-ft (3,302,026 Ml)
Condition Assessment: Satisfactory

Bagnell Dam Map

Here is a map of Bagnell Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Bagnell Dam Information

Bagnell Dam is a gravity dam located about 3 miles from Bagnell, Miller, Missouri.

The dam, which is on the Osage River, was primarily built for Hydroelectric purposes, but also serves for Recreation and Flood Risk Reduction benefits.

The dam was designed by STONE & WEBSTER and commissioned in 1931 and is currently owned by Union Electric Company.

Bagnell Dam Structure

The Bagnell Dam is approximately 2,543 feet (775 m) long, 148 feet (45 m) high and has a structural volume of 551,000 cubic yards (421,270 cubic metres).

Bagnell Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 1,926,800 acre-ft (2,376,669 Ml) and maximum capacity of 2,677,000 acre-ft (3,302,026 Ml).

The surface area of the reservoir is 55,342 acres (22,396 ha) and the total catchment area is 14,000 square miles (36,260 square kilometres).

Bagnell Dam Spillway

The dam spillway has a maximum discharge capacity of 257268 cubic feet per second (7285 cubic metres per second).

Bagnell Dam Compared to Four Famous American Dams

Bagnell Dam
Miller, Missouri
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 148 730 550 357 216
Length (Ft) 2,543 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 2,677,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 14,000 167,800 74,100 3,611 108,355

Bagnell Dam Weather

Current Conditions at Bagnell Dam

Failed to fetch current weather data.

7-Day Forecast for Bagnell Dam

Failed to fetch weather forecast data.

Bagnell Dam Frequently Asked Questions

In which state is the Bagnell Dam?

Bagnell Dam is in Missouri.

In which county is the Bagnell Dam?

Bagnell Dam is in Miller County.

How high is the Bagnell Dam?

Bagnell Dam is 148 feet high.

How long is the Bagnell Dam?

Bagnell Dam is 2,543 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG