Brushy Creek Tailing #3 Dam, Missouri, USA

Home / USA / Missouri / Brushy Creek Tailing #3 Dam

Quick Facts About Brushy Creek Tailing #3 Dam

Location: Reynolds, Missouri
Coordinates: 37.5311, -91.1278
River: Lick Creek River
Primary Purpose:
Type:
Commissioned:
Dam Height: 141 ft (43 m)
Dam Length: 1,950 ft (594 m)
Dam Capacity: 754 acre-ft (930 Ml)

Brushy Creek Tailing #3 Dam Map

Here is a map of Brushy Creek Tailing #3 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Brushy Creek Tailing #3 Dam Information

Brushy Creek Tailing #3 Dam is dam located about 5.5 miles from Bunker, Reynolds, Missouri.

The dam, which is on the Lick Creek River, was primarily built for purposes, but also serves for benefits.

The dam was designed by TERRA GROUP and commissioned in and is currently owned by .

Brushy Creek Tailing #3 Dam Structure

The Brushy Creek Tailing #3 Dam is approximately 1,950 feet (594 m) long, 141 feet (43 m) high and has a structural volume of cubic yards (0 cubic metres).

Brushy Creek Tailing #3 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 12,220 acre-ft (15,073 Ml) and maximum capacity of 754 acre-ft (930 Ml).

The surface area of the reservoir is 195 acres (79 ha) and the total catchment area is 1 square miles (3 square kilometres).

Brushy Creek Tailing #3 Dam Spillway

The dam has a 50 feet (15 m) wide uncontrolled spillway with a maximum discharge capacity of 500 cubic feet per second (14 cubic metres per second).

Brushy Creek Tailing #3 Dam Compared to Four Famous American Dams

Brushy Creek Tailing #3 Dam
Reynolds, Missouri
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 141 730 550 357 216
Length (Ft) 1,950 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 754 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1 167,800 74,100 3,611 108,355

Brushy Creek Tailing #3 Dam Weather

Current Conditions at Brushy Creek Tailing #3 Dam

Failed to fetch current weather data.

7-Day Forecast for Brushy Creek Tailing #3 Dam

Failed to fetch weather forecast data.

Brushy Creek Tailing #3 Dam Frequently Asked Questions

In which state is the Brushy Creek Tailing #3 Dam?

Brushy Creek Tailing #3 Dam is in Missouri.

In which county is the Brushy Creek Tailing #3 Dam?

Brushy Creek Tailing #3 Dam is in Reynolds County.

How high is the Brushy Creek Tailing #3 Dam?

Brushy Creek Tailing #3 Dam is 141 feet high.

How long is the Brushy Creek Tailing #3 Dam?

Brushy Creek Tailing #3 Dam is 1,950 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG