Clarence Cannon Dam, Missouri, USA

Home / USA / Missouri / Clarence Cannon Dam

Quick Facts About Clarence Cannon Dam

Location: Ralls, Missouri
Coordinates: 39.524413, -91.6438501
River: Salt River
Primary Purpose: Flood Risk Reduction
Type: Concrete Earth Gravity
Commissioned: 1983
Dam Height: 138 ft (42 m)
Dam Length: 1,940 ft (591 m)
Dam Capacity: 1,862,000 acre-ft (2,296,740 Ml)
Condition Assessment: Not Available

Clarence Cannon Dam Map

Here is a map of Clarence Cannon Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Clarence Cannon Dam Information

Clarence Cannon Dam is a concrete earth gravity dam located about 20 miles from New London, Ralls, Missouri.

The dam, which is on the Salt River, was primarily built for Flood Risk Reduction purposes, but also serves for Navigation, Fish and Wildlife Pond, Recreation, Hydroelectric and Water Supply benefits.

The dam was designed by CEMVS and commissioned in 1983 and is currently owned by USACE – St. Louis District.

Clarence Cannon Dam Structure

The Clarence Cannon Dam is approximately 1,940 feet (591 m) long, 138 feet (42 m) high and has a structural volume of 3,450,000 cubic yards (2,637,715 cubic metres).

Clarence Cannon Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 520,661 acre-ft (642,225 Ml) and maximum capacity of 1,862,000 acre-ft (2,296,740 Ml).

The surface area of the reservoir is 5,900 acres (2,388 ha) and the total catchment area is 2,318 square miles (6,004 square kilometres).

Clarence Cannon Dam Spillway

The dam has a 230 feet (70 m) wide controlled spillway with a maximum discharge capacity of 276500 cubic feet per second (7830 cubic metres per second).

Clarence Cannon Dam Compared to Four Famous American Dams

Clarence Cannon Dam
Ralls, Missouri
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 138 730 550 357 216
Length (Ft) 1,940 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 1,862,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 2,318 167,800 74,100 3,611 108,355

Clarence Cannon Dam Weather

Current Conditions at Clarence Cannon Dam

Parameter Value
Current Time 01:10
Sunrise 06:40
Sunset 19:29
Temperature (°F) 72
Feels Like (°F) 73
Cloud Coverage (%) 95
Pressure (inHg) 1017
Humidity (%) 75
Wind Speed (mph) 8
Rain (mm) 0

7-Day Forecast for Clarence Cannon Dam

Day Min Temp (°F) Max Temp (°F) Feels Like (°F) Pressure (inHg) Humidity (%) Wind Speed (mph) Wind Gust (mph) Wind Dir Precip Prob (%) Precip Volume (mm) Weather
Today 67 90 83 1018 22 12 27 ESE 0 - scattered clouds
Tue 70 103 92 1016 22 15 35 SSE 0 - broken clouds
Wed 70 105 105 1012 25 19 38 WNW 100 1 light rain
Thu 59 91 84 1016 22 9 25 SE 60 - scattered clouds
Fri 63 94 89 1011 24 18 29 SSW 100 8 moderate rain
Sat 65 98 95 1009 43 8 20 SSE 100 1 light rain
Sun 79 106 106 1006 25 22 38 SW 44 0 light rain
Mon 61 73 64 1020 63 15 24 NNW 100 2 light rain

Clarence Cannon Dam Frequently Asked Questions

In which state is the Clarence Cannon Dam?

Clarence Cannon Dam is in Missouri.

In which county is the Clarence Cannon Dam?

Clarence Cannon Dam is in Ralls County.

How high is the Clarence Cannon Dam?

Clarence Cannon Dam is 138 feet high.

How long is the Clarence Cannon Dam?

Clarence Cannon Dam is 1,940 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG