Queen Mary Dam, Missouri, USA

Home / USA / Missouri / Queen Mary Dam

Quick Facts About Queen Mary Dam

Location: Iron, Missouri
Coordinates: 37.723971, -91.1114753
River: Tr West Prong Of Indian Creek River
Primary Purpose: Other
Type: Earth Rockfill
Commissioned: 1959
Dam Height: 66 ft (20 m)
Dam Length: 850 ft (259 m)
Dam Capacity: 8,407 acre-ft (10,370 Ml)
Condition Assessment: Satisfactory

Queen Mary Dam Map

Here is a map of Queen Mary Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Queen Mary Dam Information

Queen Mary Dam is an earth rockfill dam located in Courtois, Iron, Missouri.

The dam, which is on the Tr West Prong Of Indian Creek River, was primarily built for Other purposes, but also serves for Tailings benefits.

The dam was designed by and commissioned in 1959 and is currently owned by THE DOE RUN COMPANY.

Queen Mary Dam Structure

The Queen Mary Dam is approximately 850 feet (259 m) long, 66 feet (20 m) high and has a structural volume of 100,000 cubic yards (76,456 cubic metres).

Queen Mary Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,407 acre-ft (10,370 Ml) and maximum capacity of 8,407 acre-ft (10,370 Ml).

The surface area of the reservoir is 20 acres (8 ha) and the total catchment area is 1 square miles (2 square kilometres).

Queen Mary Dam Spillway

The dam has a 3 feet (1 m) wide uncontrolled spillway with a maximum discharge capacity of 1953 cubic feet per second (55 cubic metres per second).

Queen Mary Dam Compared to Four Famous American Dams

Queen Mary Dam
Iron, Missouri
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 66 730 550 357 216
Length (Ft) 850 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,407 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1 167,800 74,100 3,611 108,355

Queen Mary Dam Weather

Current Conditions at Queen Mary Dam

Failed to fetch current weather data.

7-Day Forecast for Queen Mary Dam

Failed to fetch weather forecast data.

Queen Mary Dam Frequently Asked Questions

In which state is the Queen Mary Dam?

Queen Mary Dam is in Missouri.

In which county is the Queen Mary Dam?

Queen Mary Dam is in Iron County.

How high is the Queen Mary Dam?

Queen Mary Dam is 66 feet high.

How long is the Queen Mary Dam?

Queen Mary Dam is 850 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG