Beaver Creek Reservoir Dam, Montana, USA

Home / USA / Montana / Beaver Creek Reservoir Dam

Quick Facts About Beaver Creek Reservoir Dam

Location: Hill, Montana
Coordinates: 48.4163, -109.7323
River: Beaver Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1974
Dam Height: 108 ft (33 m)
Dam Length: 2,855 ft (870 m)
Dam Capacity: 8,700 acre-ft (10,731 Ml)

Beaver Creek Reservoir Dam Map

Here is a map of Beaver Creek Reservoir Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Beaver Creek Reservoir Dam Information

Beaver Creek Reservoir Dam is an earthen embankment dam located about 14 miles from Havre, Hill, Montana.

The dam, which is on the Beaver Creek River, was primarily built for Irrigation purposes, but also serves for Fish and Wildlife Pond, Recreation and Flood Risk Reduction benefits.

The dam was designed by USDA NRCS and commissioned in 1974 and is currently owned by HILL COUNTY.

Beaver Creek Reservoir Dam Structure

The Beaver Creek Reservoir Dam is approximately 2,855 feet (870 m) long, 108 feet (33 m) high and has a structural volume of 1,255,509 cubic yards (959,906 cubic metres).

Beaver Creek Reservoir Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 6,270 acre-ft (7,734 Ml) and maximum capacity of 8,700 acre-ft (10,731 Ml).

The surface area of the reservoir is 185 acres (75 ha) and the total catchment area is 79 square miles (205 square kilometres).

Beaver Creek Reservoir Dam Spillway

The dam has a 650 feet (198 m) wide uncontrolled spillway with a maximum discharge capacity of 15250 cubic feet per second (432 cubic metres per second).

Beaver Creek Reservoir Dam Compared to Four Famous American Dams

Beaver Creek Reservoir Dam
Hill, Montana
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 108 730 550 357 216
Length (Ft) 2,855 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 8,700 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 79 167,800 74,100 3,611 108,355

Beaver Creek Reservoir Dam Weather

Current Conditions at Beaver Creek Reservoir Dam

Failed to fetch current weather data.

7-Day Forecast for Beaver Creek Reservoir Dam

Failed to fetch weather forecast data.

Beaver Creek Reservoir Dam Frequently Asked Questions

In which state is the Beaver Creek Reservoir Dam?

Beaver Creek Reservoir Dam is in Montana.

In which county is the Beaver Creek Reservoir Dam?

Beaver Creek Reservoir Dam is in Hill County.

How high is the Beaver Creek Reservoir Dam?

Beaver Creek Reservoir Dam is 108 feet high.

How long is the Beaver Creek Reservoir Dam?

Beaver Creek Reservoir Dam is 2,855 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG