Cochrane Dam, Montana, USA

Home / USA / Montana / Cochrane Dam

Quick Facts About Cochrane Dam

Location: Cascade, Montana
Coordinates: 47.5529, -111.149
River: Missouri River
Primary Purpose: Hydroelectric
Type: Gravity Concrete
Commissioned: 1957
Dam Height: 100 ft (30 m)
Dam Length: 856 ft (261 m)
Dam Capacity: acre-ft (0 Ml)

Cochrane Dam Map

Here is a map of Cochrane Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Cochrane Dam Information

Cochrane Dam is a gravity concrete dam located about 35 miles from Fort Benton, Cascade, Montana.

The dam, which is on the Missouri River, was primarily built for Hydroelectric purposes, but also serves for benefits.

The dam was designed by Bechtel Corporation and commissioned in 1957 and is currently owned by NorthWestern Energy.

Cochrane Dam Structure

The Cochrane Dam is approximately 856 feet (261 m) long, 100 feet (30 m) high and has a structural volume of cubic yards (0 cubic metres).

Cochrane Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,464 acre-ft (10,440 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 249 acres (101 ha) and the total catchment area is 23,270 square miles (60,269 square kilometres).

Cochrane Dam Spillway

The dam spillway has a maximum discharge capacity of 140000 cubic feet per second (3964 cubic metres per second).

Cochrane Dam Compared to Four Famous American Dams

Cochrane Dam
Cascade, Montana
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 100 730 550 357 216
Length (Ft) 856 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 23,270 167,800 74,100 3,611 108,355

Cochrane Dam Weather

Current Conditions at Cochrane Dam

Failed to fetch current weather data.

7-Day Forecast for Cochrane Dam

Failed to fetch weather forecast data.

Cochrane Dam Frequently Asked Questions

In which state is the Cochrane Dam?

Cochrane Dam is in Montana.

In which county is the Cochrane Dam?

Cochrane Dam is in Cascade County.

How high is the Cochrane Dam?

Cochrane Dam is 100 feet high.

How long is the Cochrane Dam?

Cochrane Dam is 856 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG