Dry Fork Dam, Montana, USA

Quick Facts About Dry Fork Dam

Location: Blaine, Montana
Coordinates: 48.6644, -109.2227
River: Dry Fork Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1986
Dam Height: 45 ft (14 m)
Dam Length: 1,300 ft (396 m)
Dam Capacity: 6,229 acre-ft (7,683 Ml)
Hazard Potential: Significant

Dry Fork Dam Map

Here is a map of Dry Fork Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Dry Fork Dam Information

Dry Fork Dam is an earthen embankment dam located about 8 miles from Chinook, Blaine, Montana.

The dam, which is on the Dry Fork Creek River, was primarily built for Irrigation purposes, but also serves for Fire Protection, Stock and Or Small Fish Pond benefits.

The dam was designed by and commissioned in 1986 and is currently owned by BRIESE BROTHERS.

Dry Fork Dam Structure

The Dry Fork Dam is approximately 1,300 feet (396 m) long, 45 feet (14 m) high and has a structural volume of cubic yards (0 cubic metres).

Dry Fork Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 6,229 acre-ft (7,683 Ml) and maximum capacity of 6,229 acre-ft (7,683 Ml).

The surface area of the reservoir is 406 acres (164 ha) and the total catchment area is square miles (0 square kilometres).

Dry Fork Dam Spillway

According to the latest available data, the Dry Fork Dam does not have any spillways.

Dry Fork Dam Compared to Four Famous American Dams

Dry Fork Dam
Blaine, Montana
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 45 730 550 357 216
Length (Ft) 1,300 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 6,229 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 167,800 74,100 3,611 108,355

Dry Fork Dam Weather

Current Conditions at Dry Fork Dam

Failed to fetch current weather data.

7-Day Forecast for Dry Fork Dam

Failed to fetch weather forecast data.

Dry Fork Dam Frequently Asked Questions

In which state is the Dry Fork Dam?

Dry Fork Dam is in Montana.

In which county is the Dry Fork Dam?

Dry Fork Dam is in Blaine County.

How high is the Dry Fork Dam?

Dry Fork Dam is 45 feet high.

How long is the Dry Fork Dam?

Dry Fork Dam is 1,300 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG