Frenchman Dam, Montana, USA

Home / USA / Montana / Frenchman Dam

Quick Facts About Frenchman Dam

Location: Phillips, Montana
Coordinates: 48.958776, -107.224703
River: Frenchman Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1953
Dam Height: 63 ft (19 m)
Dam Length: 2,100 ft (640 m)
Dam Capacity: 13,540 acre-ft (16,701 Ml)
Hazard Potential: Significant

Frenchman Dam Map

Here is a map of Frenchman Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Frenchman Dam Information

Frenchman Dam is an earthen embankment dam located about 22 miles from Saco, Phillips, Montana.

The dam, which is on the Frenchman Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1953 and is currently owned by STATE WATER PROJECTS.

Frenchman Dam Structure

The Frenchman Dam is approximately 2,100 feet (640 m) long, 63 feet (19 m) high and has a structural volume of cubic yards (0 cubic metres).

Frenchman Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,752 acre-ft (4,628 Ml) and maximum capacity of 13,540 acre-ft (16,701 Ml).

The surface area of the reservoir is 800 acres (324 ha) and the total catchment area is 2,460 square miles (6,371 square kilometres).

Frenchman Dam Spillway

The dam has a 119 feet (36 m) wide uncontrolled spillway with a maximum discharge capacity of 36000 cubic feet per second (1019 cubic metres per second).

Frenchman Dam Compared to Four Famous American Dams

Frenchman Dam
Phillips, Montana
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 63 730 550 357 216
Length (Ft) 2,100 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 13,540 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 2,460 167,800 74,100 3,611 108,355

Frenchman Dam Weather

Current Conditions at Frenchman Dam

Failed to fetch current weather data.

7-Day Forecast for Frenchman Dam

Failed to fetch weather forecast data.

Frenchman Dam Frequently Asked Questions

In which state is the Frenchman Dam?

Frenchman Dam is in Montana.

In which county is the Frenchman Dam?

Frenchman Dam is in Phillips County.

How high is the Frenchman Dam?

Frenchman Dam is 63 feet high.

How long is the Frenchman Dam?

Frenchman Dam is 2,100 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG