Gibson Dam, Montana, USA

Quick Facts About Gibson Dam

Location: Teton, Montana
Coordinates: 47.6014, -112.7616
River: North Fork Sun River
Primary Purpose: Irrigation
Type: Concrete Arch
Commissioned: 1928
Dam Height: 199 ft (61 m)
Dam Length: 960 ft (293 m)
Dam Capacity: 121,981 acre-ft (150,461 Ml)
Condition Assessment: Not Available

Gibson Dam Map

Here is a map of Gibson Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Gibson Dam Information

Gibson Dam is a concrete arch dam located about 50 miles from Simms, Teton, Montana.

The dam, which is on the North Fork Sun River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1928 and is currently owned by US Bureau of Reclamation.

Gibson Dam Structure

The Gibson Dam is approximately 960 feet (293 m) long, 199 feet (61 m) high and has a structural volume of 167,500 cubic yards (128,063 cubic metres).

Gibson Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 99,059 acre-ft (122,187 Ml) and maximum capacity of 121,981 acre-ft (150,461 Ml).

The surface area of the reservoir is 1,420 acres (575 ha) and the total catchment area is 575 square miles (1,489 square kilometres).

Gibson Dam Spillway

The dam has a 204 feet (62 m) wide controlled spillway with a maximum discharge capacity of 50000 cubic feet per second (1416 cubic metres per second).

Gibson Dam Compared to Four Famous American Dams

Gibson Dam
Teton, Montana
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 199 730 550 357 216
Length (Ft) 960 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 121,981 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 575 167,800 74,100 3,611 108,355

Gibson Dam Weather

Current Conditions at Gibson Dam

Failed to fetch current weather data.

7-Day Forecast for Gibson Dam

Failed to fetch weather forecast data.

Gibson Dam Frequently Asked Questions

In which state is the Gibson Dam?

Gibson Dam is in Montana.

In which county is the Gibson Dam?

Gibson Dam is in Teton County.

How high is the Gibson Dam?

Gibson Dam is 199 feet high.

How long is the Gibson Dam?

Gibson Dam is 960 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG