Katy's Lake Dam, Montana, USA

Home / USA / Montana / Katy's Lake Dam

Quick Facts About Katy’s Lake Dam

Location: Sheridan, Montana
Coordinates: 48.544998, -104.199997
River: Lake Creek River
Primary Purpose: Fish and Wildlife Pond
Type: Earth
Commissioned: 1990
Dam Height: 10 ft (3 m)
Dam Length: 350 ft (107 m)
Dam Capacity: 10,560 acre-ft (13,026 Ml)

Katy’s Lake Dam Map

Here is a map of Katy’s Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Katy’s Lake Dam Information

Katy’s Lake Dam is an earthen embankment dam located in Sheridan County, Montana.

The dam, which is on the Lake Creek River, was primarily built for Fish and Wildlife Pond purposes, but also serves for benefits.

The dam was designed by USFWS and Ducks Unlimited and commissioned in 1990 and is currently owned by US FISH AND WILDLIFE SERVICE.

Katy’s Lake Dam Structure

The Katy’s Lake Dam is approximately 350 feet (107 m) long, 10 feet (3 m) high and has a structural volume of 6,200 cubic yards (4,740 cubic metres).

Katy’s Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,000 acre-ft (6,167 Ml) and maximum capacity of 10,560 acre-ft (13,026 Ml).

The surface area of the reservoir is 250 acres (101 ha) and the total catchment area is 7 square miles (18 square kilometres).

Katy’s Lake Dam Spillway

The dam spillway has a maximum discharge capacity of 100 cubic feet per second (3 cubic metres per second).

Katy’s Lake Dam Compared to Four Famous American Dams

Katy’s Lake Dam
Sheridan, Montana
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 10 730 550 357 216
Length (Ft) 350 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 10,560 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 7 167,800 74,100 3,611 108,355

Katy’s Lake Dam Weather

Current Conditions at Katy’s Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Katy’s Lake Dam

Failed to fetch weather forecast data.

Katy’s Lake Dam Frequently Asked Questions

In which state is the Katy’s Lake Dam?

Katy’s Lake Dam is in Montana.

In which county is the Katy’s Lake Dam?

Katy’s Lake Dam is in Sheridan County.

How high is the Katy’s Lake Dam?

Katy’s Lake Dam is 10 feet high.

How long is the Katy’s Lake Dam?

Katy’s Lake Dam is 350 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG