Petrolia Dam, Montana, USA

Home / USA / Montana / Petrolia Dam

Quick Facts About Petrolia Dam

Location: Petroleum, Montana
Coordinates: 46.941, -108.2359
River: South Fork Flatwillow Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1951
Dam Height: 76 ft (23 m)
Dam Length: 3,635 ft (1,108 m)
Dam Capacity: 14,170 acre-ft (17,478 Ml)

Petrolia Dam Map

Here is a map of Petrolia Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Petrolia Dam Information

Petrolia Dam is an earthen embankment dam located about 31 miles from Mosby, Petroleum, Montana.

The dam, which is on the South Fork Flatwillow Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1951 and is currently owned by PETROLIA IRRIGATION DISTRICT.

Petrolia Dam Structure

The Petrolia Dam is approximately 3,635 feet (1,108 m) long, 76 feet (23 m) high and has a structural volume of cubic yards (0 cubic metres).

Petrolia Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 9,192 acre-ft (11,338 Ml) and maximum capacity of 14,170 acre-ft (17,478 Ml).

The surface area of the reservoir is 515 acres (208 ha) and the total catchment area is 612 square miles (1,585 square kilometres).

Petrolia Dam Spillway

The dam spillway has a maximum discharge capacity of 10200 cubic feet per second (289 cubic metres per second).

Petrolia Dam Compared to Four Famous American Dams

Petrolia Dam
Petroleum, Montana
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 76 730 550 357 216
Length (Ft) 3,635 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 14,170 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 612 167,800 74,100 3,611 108,355

Petrolia Dam Weather

Current Conditions at Petrolia Dam

Failed to fetch current weather data.

7-Day Forecast for Petrolia Dam

Failed to fetch weather forecast data.

Petrolia Dam Frequently Asked Questions

In which state is the Petrolia Dam?

Petrolia Dam is in Montana.

In which county is the Petrolia Dam?

Petrolia Dam is in Petroleum County.

How high is the Petrolia Dam?

Petrolia Dam is 76 feet high.

How long is the Petrolia Dam?

Petrolia Dam is 3,635 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG