Tiber Dam

Tiber Dam Quick Facts

Location: Liberty, Montana
Coordinates: 48.3219, -111.0969
River: Marias River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1955
Dam Height: 206 ft (63 m)
Dam Length: 4,526 ft (1,380 m)
Dam Capacity: 1,424,478 acre-ft (1,757,065 Ml)
Condition Assessment: Not Available
Share Tiber Dam:

Tiber Dam Map

Tiber Dam Information

Tiber Dam is an earthen embankment dam located about 59 miles from Loma, Liberty, Montana.

The dam, which is on the Marias River, was primarily built for Flood Risk Reduction purposes, but also serves for Irrigation, Recreation and Water Supply benefits.

The dam was designed by and commissioned in 1955 and is currently owned by US Bureau of Reclamation.

Tiber Dam Structure

The Tiber Dam is approximately 4,526 feet (1,380 m) long, 206 feet (63 m) high and has a structural volume of 11,485,000 cubic yards (8,780,914 cubic metres).

Tiber Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 967,320 acre-ft (1,193,170 Ml) and maximum capacity of 1,424,478 acre-ft (1,757,065 Ml).

The surface area of the reservoir is 23,805 acres (9,634 ha) and the total catchment area is 4,393 square miles (11,378 square kilometres).

Tiber Dam Spillway

The dam has a 66 feet (20 m) wide controlled spillway with a maximum discharge capacity of 68470 cubic feet per second (1939 cubic metres per second).

Tiber Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Tiber Dam
Liberty, Montana
Height (ft)
206
Length (Ft)
4,526
Storage Volume (acre-ft)
1,424,478
Drainage Area (sq miles)
4,393
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Tiber Dam Weather

Current Conditions at Tiber Dam

Failed to fetch current weather data.

7-Day Forecast for Tiber Dam

Failed to fetch weather forecast data.

Tiber Dam Frequently Asked Questions

In which state is the Tiber Dam?

Tiber Dam is in Montana.

In which county is the Tiber Dam?

Tiber Dam is in Liberty County.

How high is the Tiber Dam?

Tiber Dam is 206 feet high.

How long is the Tiber Dam?

Tiber Dam is 4,526 feet long.

Share Tiber Dam:

More Dams in Liberty County:

Alders Reservoir Dam
Interstate Paper Corporation Big Pond Dam
Tiber Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG