Quick Facts About Big Sandy Creek 35-5-2 (Bruning Dam)
Big Sandy Creek 35-5-2 (Bruning Dam) Map
Big Sandy Creek 35-5-2 (Bruning Dam) Information
Big Sandy Creek 35-5-2 (Bruning Dam) is an earthen embankment dam located about 13 miles from Alexandria, Fillmore, Nebraska.
The dam, which is on the Tr-Dry Sandy Creek River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.
The dam was designed by HWS Consulting Group Inc. and commissioned in 1984 and is currently owned by Little Blue Natural Resources District.
Big Sandy Creek 35-5-2 (Bruning Dam) Structure
The Big Sandy Creek 35-5-2 (Bruning Dam) is approximately 1,780 feet (543 m) long, 45 feet (14 m) high and has a structural volume of 189,350 cubic yards (144,768 cubic metres).
Big Sandy Creek 35-5-2 (Bruning Dam) Storage Capacity & Surface Area
The reservoir has a normal storage capacity of 1,954 acre-ft (2,410 Ml) and maximum capacity of 10,538 acre-ft (12,998 Ml).
The surface area of the reservoir is 259 acres (105 ha) and the total catchment area is 25 square miles (64 square kilometres).
Big Sandy Creek 35-5-2 (Bruning Dam) Spillway
The dam spillway has a maximum discharge capacity of 9075 cubic feet per second (257 cubic metres per second).
Big Sandy Creek 35-5-2 (Bruning Dam) Compared to Four Famous American Dams
| Big Sandy Creek 35-5-2 (Bruning Dam) Fillmore, Nebraska |
Hoover Dam Clark County, Nevada |
Grand Coulee Dam Okanogan County, Washington |
Theodore Roosevelt Dam Maricopa County, Arizona |
Glen Canyon Dam Coconino County, Arizona |
|
|---|---|---|---|---|---|
| Height (ft) | 45 | 730 | 550 | 357 | 216 |
| Length (Ft) | 1,780 | 1,244 | 5,673 | 6,920 | 1,565 |
| Storage Volume (acre-ft) | 10,538 | 30,237,000 | 9,562,000 | 3,540,000 | 29,875,000 |
| Drainage Area (sq miles) | 25 | 167,800 | 74,100 | 3,611 | 108,355 |
Big Sandy Creek 35-5-2 (Bruning Dam) Weather
Current Conditions at Big Sandy Creek 35-5-2 (Bruning Dam)
Failed to fetch current weather data.7-Day Forecast for Big Sandy Creek 35-5-2 (Bruning Dam)
Failed to fetch weather forecast data.Big Sandy Creek 35-5-2 (Bruning Dam) Frequently Asked Questions
Big Sandy Creek 35-5-2 (Bruning Dam) is in Nebraska.
Big Sandy Creek 35-5-2 (Bruning Dam) is in Fillmore County.
Big Sandy Creek 35-5-2 (Bruning Dam) is 45 feet high.
Big Sandy Creek 35-5-2 (Bruning Dam) is 1,780 feet long.
More Dams in Nebraska:
Antelope Creek 40-B DamBeaver Lake Dam
Big Indian Creek 14-B Dam
Big Plum Creek Dam
Big Sandy Creek 20-6-7 Dam
Big Sandy Creek 35-5-2 (Bruning Dam)
Blackwood Creek 11-A Dam
Blackwood Creek 12-A Dam
Box Butte Dam
Buffalo Creek B-1 Dam
Davis Creek Dam
Elwood Dam
Enders Dam
Kingsley Dam
Lake Alice No. 1 Dam
Lake Wanahoo Dam
Little Sandy Creek 40 Dam
Long Branch 21 Dam
Lower Medicine Creek 160 Dam
Maloney Dam
Maple Creek Recreation Area Dam
Medicine Creek Dam
Merritt Dam
Minatare Dam
Mud Creek 2-A Dam
Mud Lake Wetland South Dam
Newport Landing Dam
Oliver Dam
Papio Creek 15-A Dam
Pigeon-Jones Creek 15 Dam
Prairie Creek Upland Dam 1 (Pcul 1)
Prairie Queen Main Dam
Red Willow Dam
Sherman Dam
Spring Creek 11-A 303 Dam
Spring Creek 19-B Dam
Sutherland Dam
Tekamah-Mud Creek 5-A Dam
Trenton Dam
Upper Medicine Creek 390-B Dam
Upper Medicine Creek 410 Dam
Virginia Smith Dam
Weeping Water Creek 8-A Dam
Whitney Dam 1
Willow Creek Dam
Condition Assessment Classification
Satisfactory
No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.
Fair
No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum
Poor
A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.
Unsatisfactory
A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.
Not Rated
The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.
Not Available
Dams for which the condition assessment is restricted to approved government users.
Hazard Potential Classification
High
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.
Significant
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.
Low
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.
Undetermined
Dams for which a downstream hazard potential has not been designated or is not provided.
Not Available
Dams for which the downstream hazard potential is restricted to approved government users.
Source: National Inventory of Dams