Arlington Mills Res West Dike, New Hampshire, USA

Home / USA / New Hampshire / Arlington Mills Res West Dike

Quick Facts About Arlington Mills Res West Dike

Location: Rockingham, New Hampshire
Coordinates: 42.814921, -71.207698
River: Spickett River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1922
Dam Height: 10 ft (3 m)
Dam Length: 230 ft (70 m)
Dam Capacity: 5,530 acre-ft (6,821 Ml)
Condition Assessment: Satisfactory

Arlington Mills Res West Dike Map

Here is a map of Arlington Mills Res West Dike with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Arlington Mills Res West Dike Information

Arlington Mills Res West Dike is an earthen embankment dam located in Salem, Rockingham, New Hampshire.

The dam, which is on the Spickett River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1922 and is currently owned by TOWN OF SALEM.

Arlington Mills Res West Dike Structure

The Arlington Mills Res West Dike is approximately 230 feet (70 m) long, 10 feet (3 m) high and has a structural volume of cubic yards (0 cubic metres).

Arlington Mills Res West Dike Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,100 acre-ft (3,824 Ml) and maximum capacity of 5,530 acre-ft (6,821 Ml).

The surface area of the reservoir is 320 acres (129 ha) and the total catchment area is 21 square miles (54 square kilometres).

Arlington Mills Res West Dike Spillway

According to the latest available data, the Arlington Mills Res West Dike does not have any spillways.

Arlington Mills Res West Dike Compared to Four Famous American Dams

Arlington Mills Res West Dike
Rockingham, New Hampshire
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 10 730 550 357 216
Length (Ft) 230 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,530 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 21 167,800 74,100 3,611 108,355

Arlington Mills Res West Dike Weather

Current Conditions at Arlington Mills Res West Dike

Failed to fetch current weather data.

7-Day Forecast for Arlington Mills Res West Dike

Failed to fetch weather forecast data.

Arlington Mills Res West Dike Frequently Asked Questions

In which state is the Arlington Mills Res West Dike?

Arlington Mills Res West Dike is in New Hampshire.

In which county is the Arlington Mills Res West Dike?

Arlington Mills Res West Dike is in Rockingham County.

How high is the Arlington Mills Res West Dike?

Arlington Mills Res West Dike is 10 feet high.

How long is the Arlington Mills Res West Dike?

Arlington Mills Res West Dike is 230 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG