Mascoma Lake Dam, New Hampshire, USA

Home / USA / New Hampshire / Mascoma Lake Dam

Quick Facts About Mascoma Lake Dam

Location: Grafton, New Hampshire
Coordinates: 43.6483, -72.1822
River: Mascoma River
Primary Purpose: Recreation
Type: Concrete
Commissioned: 1881
Dam Height: 18 ft (5 m)
Dam Length: 575 ft (175 m)
Dam Capacity: 18,300 acre-ft (22,573 Ml)

Mascoma Lake Dam Map

Here is a map of Mascoma Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Mascoma Lake Dam Information

Mascoma Lake Dam is a concrete dam located in Lebanon, Grafton, New Hampshire.

The dam, which is on the Mascoma River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1881 and is currently owned by NH DES WATER DIVISION.

Mascoma Lake Dam Structure

The Mascoma Lake Dam is approximately 575 feet (175 m) long, 18 feet (5 m) high and has a structural volume of cubic yards (0 cubic metres).

Mascoma Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 8,332 acre-ft (10,277 Ml) and maximum capacity of 18,300 acre-ft (22,573 Ml).

The surface area of the reservoir is 1,155 acres (467 ha) and the total catchment area is 153 square miles (396 square kilometres).

Mascoma Lake Dam Spillway

The dam spillway has a maximum discharge capacity of 17255 cubic feet per second (489 cubic metres per second).

Mascoma Lake Dam Compared to Four Famous American Dams

Mascoma Lake Dam
Grafton, New Hampshire
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 18 730 550 357 216
Length (Ft) 575 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 18,300 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 153 167,800 74,100 3,611 108,355

Mascoma Lake Dam Weather

Current Conditions at Mascoma Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Mascoma Lake Dam

Failed to fetch weather forecast data.

Mascoma Lake Dam Frequently Asked Questions

In which state is the Mascoma Lake Dam?

Mascoma Lake Dam is in New Hampshire.

In which county is the Mascoma Lake Dam?

Mascoma Lake Dam is in Grafton County.

How high is the Mascoma Lake Dam?

Mascoma Lake Dam is 18 feet high.

How long is the Mascoma Lake Dam?

Mascoma Lake Dam is 575 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG