Moore Dam, New Hampshire, USA

Home / USA / New Hampshire / Moore Dam

Quick Facts About Moore Dam

Location: Grafton, New Hampshire
Coordinates: 44.3352, -71.876
River: Connecticut River
Primary Purpose: Hydroelectric
Type: Concrete Earth Gravity
Commissioned: 1957
Dam Height: 149 ft (45 m)
Dam Length: 2,920 ft (890 m)
Dam Capacity: 223,722 acre-ft (275,957 Ml)
Condition Assessment: Satisfactory

Moore Dam Map

Here is a map of Moore Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Moore Dam Information

Moore Dam is a concrete earth gravity dam located about 9 miles from Barnet, Vt, Grafton, New Hampshire.

The dam, which is on the Connecticut River, was primarily built for Hydroelectric purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1957 and is currently owned by Great River Hydro, LLC.

Moore Dam Structure

The Moore Dam is approximately 2,920 feet (890 m) long, 149 feet (45 m) high and has a structural volume of cubic yards (0 cubic metres).

Moore Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 223,722 acre-ft (275,957 Ml) and maximum capacity of 223,722 acre-ft (275,957 Ml).

The surface area of the reservoir is 3,490 acres (1,412 ha) and the total catchment area is 1,600 square miles (4,144 square kilometres).

Moore Dam Spillway

The dam has a 373 feet (114 m) wide controlled spillway with a maximum discharge capacity of 211300 cubic feet per second (5983 cubic metres per second).

Moore Dam Compared to Four Famous American Dams

Moore Dam
Grafton, New Hampshire
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 149 730 550 357 216
Length (Ft) 2,920 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 223,722 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,600 167,800 74,100 3,611 108,355

Moore Dam Weather

Current Conditions at Moore Dam

Failed to fetch current weather data.

7-Day Forecast for Moore Dam

Failed to fetch weather forecast data.

Moore Dam Frequently Asked Questions

In which state is the Moore Dam?

Moore Dam is in New Hampshire.

In which county is the Moore Dam?

Moore Dam is in Grafton County.

How high is the Moore Dam?

Moore Dam is 149 feet high.

How long is the Moore Dam?

Moore Dam is 2,920 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG