Murphy Dam, New Hampshire, USA

Home / USA / New Hampshire / Murphy Dam

Quick Facts About Murphy Dam

Location: Coos, New Hampshire
Coordinates: 45.046212, -71.381648
River: Connecticut River
Primary Purpose: Recreation
Type: Earth
Commissioned: 1938
Dam Height: 106 ft (32 m)
Dam Length: 2,200 ft (671 m)
Dam Capacity: 132,000 acre-ft (162,819 Ml)

Murphy Dam Map

Here is a map of Murphy Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Murphy Dam Information

Murphy Dam is an earthen embankment dam located in Pittsburg, Coos, New Hampshire.

The dam, which is on the Connecticut River, was primarily built for Recreation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1938 and is currently owned by NH DES WATER DIVISION.

Murphy Dam Structure

The Murphy Dam is approximately 2,200 feet (671 m) long, 106 feet (32 m) high and has a structural volume of cubic yards (0 cubic metres).

Murphy Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 99,500 acre-ft (122,731 Ml) and maximum capacity of 132,000 acre-ft (162,819 Ml).

The surface area of the reservoir is 1,895 acres (767 ha) and the total catchment area is 171 square miles (442 square kilometres).

Murphy Dam Spillway

The dam spillway has a maximum discharge capacity of 74000 cubic feet per second (2095 cubic metres per second).

Murphy Dam Compared to Four Famous American Dams

Murphy Dam
Coos, New Hampshire
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 106 730 550 357 216
Length (Ft) 2,200 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 132,000 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 171 167,800 74,100 3,611 108,355

Murphy Dam Weather

Current Conditions at Murphy Dam

Failed to fetch current weather data.

7-Day Forecast for Murphy Dam

Failed to fetch weather forecast data.

Murphy Dam Frequently Asked Questions

In which state is the Murphy Dam?

Murphy Dam is in New Hampshire.

In which county is the Murphy Dam?

Murphy Dam is in Coos County.

How high is the Murphy Dam?

Murphy Dam is 106 feet high.

How long is the Murphy Dam?

Murphy Dam is 2,200 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG