Parsippany Dike, New Jersey, USA

Home / USA / New Jersey / Parsippany Dike

Quick Facts About Parsippany Dike

Location: Morris, New Jersey
Coordinates: 40.868533, -74.4129667
River: Rockaway River
Primary Purpose: Water Supply
Type: Masonry
Commissioned: 1905
Dam Height: 30 ft (9 m)
Dam Length: 2,150 ft (655 m)
Dam Capacity: acre-ft (0 Ml)
Condition Assessment: Satisfactory

Parsippany Dike Map

Here is a map of Parsippany Dike with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Parsippany Dike Information

Parsippany Dike is a masonry dam located in Morris County, New Jersey.

The dam, which is on the Rockaway River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1905 and is currently owned by Jersey City Municipal Utilities Authority.

Parsippany Dike Structure

The Parsippany Dike is approximately 2,150 feet (655 m) long, 30 feet (9 m) high and has a structural volume of cubic yards (0 cubic metres).

Parsippany Dike Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 28,000 acre-ft (34,537 Ml) and maximum capacity of acre-ft (0 Ml).

The surface area of the reservoir is 800 acres (324 ha) and the total catchment area is 119 square miles (308 square kilometres).

Parsippany Dike Spillway

The dam spillway has a maximum discharge capacity of 11 cubic feet per second (0 cubic metres per second).

Parsippany Dike Compared to Four Famous American Dams

Parsippany Dike
Morris, New Jersey
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 30 730 550 357 216
Length (Ft) 2,150 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 119 167,800 74,100 3,611 108,355

Parsippany Dike Weather

Current Conditions at Parsippany Dike

Failed to fetch current weather data.

7-Day Forecast for Parsippany Dike

Failed to fetch weather forecast data.

Parsippany Dike Frequently Asked Questions

In which state is the Parsippany Dike?

Parsippany Dike is in New Jersey.

In which county is the Parsippany Dike?

Parsippany Dike is in Morris County.

How high is the Parsippany Dike?

Parsippany Dike is 30 feet high.

How long is the Parsippany Dike?

Parsippany Dike is 2,150 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG