Las Cruces Dam, New Mexico, USA

Home / USA / New Mexico / Las Cruces Dam

Quick Facts About Las Cruces Dam

Location: Doña Ana, New Mexico
Coordinates: 32.3462, -106.7619
River: Alameda & Las Cruces Arroyos River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1975
Dam Height: 67 ft (20 m)
Dam Length: 15,570 ft (4,746 m)
Dam Capacity: 13,200 acre-ft (16,282 Ml)
Condition Assessment: Satisfactory

Las Cruces Dam Map

Here is a map of Las Cruces Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Las Cruces Dam Information

Las Cruces Dam is an earthen embankment dam located in Las Cruces, Doña Ana, New Mexico.

The dam, which is on the Alameda & Las Cruces Arroyos River, was primarily built for Flood Risk Reduction purposes, but also serves for benefits.

The dam was designed by US ARMY CORPS OF ENGINEERS and commissioned in 1975 and is currently owned by CITY OF LAS CRUCES.

Las Cruces Dam Structure

The Las Cruces Dam is approximately 15,570 feet (4,746 m) long, 67 feet (20 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Las Cruces Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 13,200 acre-ft (16,282 Ml).

The surface area of the reservoir is 550 acres (223 ha) and the total catchment area is 29 square miles (75 square kilometres).

Las Cruces Dam Spillway

The dam has a 400 feet (122 m) wide uncontrolled spillway with a maximum discharge capacity of 30400 cubic feet per second (861 cubic metres per second).

Las Cruces Dam Compared to Four Famous American Dams

Las Cruces Dam
Doña Ana, New Mexico
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 67 730 550 357 216
Length (Ft) 15,570 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 13,200 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 29 167,800 74,100 3,611 108,355

Las Cruces Dam Weather

Current Conditions at Las Cruces Dam

Failed to fetch current weather data.

7-Day Forecast for Las Cruces Dam

Failed to fetch weather forecast data.

Las Cruces Dam Frequently Asked Questions

In which state is the Las Cruces Dam?

Las Cruces Dam is in New Mexico.

In which county is the Las Cruces Dam?

Las Cruces Dam is in Doña Ana County.

How high is the Las Cruces Dam?

Las Cruces Dam is 67 feet high.

How long is the Las Cruces Dam?

Las Cruces Dam is 15,570 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG