Morgan Dam, New Mexico, USA

Home / USA / New Mexico / Morgan Dam

Quick Facts About Morgan Dam

Location: San Juan, New Mexico
Coordinates: 36.7041, -108.486
River: Chaco Wash – Tr River
Primary Purpose: Other
Type: Earth
Commissioned: 1961
Dam Height: 133 ft (41 m)
Dam Length: 6,760 ft (2,060 m)
Dam Capacity: 42,800 acre-ft (52,793 Ml)
Condition Assessment: Satisfactory

Morgan Dam Map

Here is a map of Morgan Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Morgan Dam Information

Morgan Dam is an earthen embankment dam located about 15 miles from Shiprock, San Juan, New Mexico.

The dam, which is on the Chaco Wash – Tr River, was primarily built for Other purposes, but also serves for benefits.

The dam was designed by W. Carlos Powell Engineering & Ebasco and commissioned in 1961 and is currently owned by Arizona Public Service Company.

Morgan Dam Structure

The Morgan Dam is approximately 6,760 feet (2,060 m) long, 133 feet (41 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Morgan Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 39,200 acre-ft (48,352 Ml) and maximum capacity of 42,800 acre-ft (52,793 Ml).

The surface area of the reservoir is 1,260 acres (510 ha) and the total catchment area is 4 square miles (10 square kilometres).

Morgan Dam Spillway

The dam has a 50 feet (15 m) wide uncontrolled spillway with a maximum discharge capacity of 650 cubic feet per second (18 cubic metres per second).

Morgan Dam Compared to Four Famous American Dams

Morgan Dam
San Juan, New Mexico
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 133 730 550 357 216
Length (Ft) 6,760 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 42,800 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 4 167,800 74,100 3,611 108,355

Morgan Dam Weather

Current Conditions at Morgan Dam

Failed to fetch current weather data.

7-Day Forecast for Morgan Dam

Failed to fetch weather forecast data.

Morgan Dam Frequently Asked Questions

In which state is the Morgan Dam?

Morgan Dam is in New Mexico.

In which county is the Morgan Dam?

Morgan Dam is in San Juan County.

How high is the Morgan Dam?

Morgan Dam is 133 feet high.

How long is the Morgan Dam?

Morgan Dam is 6,760 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG