Ramah Dam, New Mexico, USA

Home / USA / New Mexico / Ramah Dam

Quick Facts About Ramah Dam

Location: McKinley, New Mexico
Coordinates: 35.1452, -108.4897
River: Cebolla Creek River
Primary Purpose: Irrigation
Type: Earth
Commissioned: 1900
Dam Height: 40 ft (12 m)
Dam Length: 1,100 ft (335 m)
Dam Capacity: 9,620 acre-ft (11,866 Ml)

Ramah Dam Map

Here is a map of Ramah Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Ramah Dam Information

Ramah Dam is an earthen embankment dam located about 1 miles from Ramah, McKinley, New Mexico.

The dam, which is on the Cebolla Creek River, was primarily built for Irrigation purposes, but also serves for benefits.

The dam was designed by and commissioned in 1900 and is currently owned by RAMAH LAND AND IRRIGATION COMPANY.

Ramah Dam Structure

The Ramah Dam is approximately 1,100 feet (335 m) long, 40 feet (12 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Ramah Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,784 acre-ft (4,667 Ml) and maximum capacity of 9,620 acre-ft (11,866 Ml).

The surface area of the reservoir is 514 acres (208 ha) and the total catchment area is 47 square miles (122 square kilometres).

Ramah Dam Spillway

The dam has a 190 feet (58 m) wide uncontrolled spillway with a maximum discharge capacity of 13266 cubic feet per second (376 cubic metres per second).

Ramah Dam Compared to Four Famous American Dams

Ramah Dam
McKinley, New Mexico
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 40 730 550 357 216
Length (Ft) 1,100 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 9,620 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 47 167,800 74,100 3,611 108,355

Ramah Dam Weather

Current Conditions at Ramah Dam

Failed to fetch current weather data.

7-Day Forecast for Ramah Dam

Failed to fetch weather forecast data.

Ramah Dam Frequently Asked Questions

In which state is the Ramah Dam?

Ramah Dam is in New Mexico.

In which county is the Ramah Dam?

Ramah Dam is in McKinley County.

How high is the Ramah Dam?

Ramah Dam is 40 feet high.

How long is the Ramah Dam?

Ramah Dam is 1,100 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG