Running Water Draw Site 1 Dam, New Mexico, USA

Home / USA / New Mexico / Running Water Draw Site 1 Dam

Quick Facts About Running Water Draw Site 1 Dam

Location: Curry, New Mexico
Coordinates: 34.518, -103.1495
River: Running Water Draw River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1975
Dam Height: 65 ft (20 m)
Dam Length: 3,208 ft (978 m)
Dam Capacity: 25,150 acre-ft (31,022 Ml)

Running Water Draw Site 1 Dam Map

Here is a map of Running Water Draw Site 1 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Running Water Draw Site 1 Dam Information

Running Water Draw Site 1 Dam is an earthen embankment dam located in Bovina, Tx, Curry, New Mexico.

The dam, which is on the Running Water Draw River, was primarily built for Flood Risk Reduction purposes, but also serves for Water Supply benefits.

The dam was designed by USDA NRCS and commissioned in 1975 and is currently owned by CENTRAL CURRY SOIL & WATER CONSERVATION DISTRICT.

Running Water Draw Site 1 Dam Structure

The Running Water Draw Site 1 Dam is approximately 3,208 feet (978 m) long, 65 feet (20 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Running Water Draw Site 1 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 2,170 acre-ft (2,677 Ml) and maximum capacity of 25,150 acre-ft (31,022 Ml).

The surface area of the reservoir is 1,581 acres (640 ha) and the total catchment area is 128 square miles (332 square kilometres).

Running Water Draw Site 1 Dam Spillway

The dam spillway has a maximum discharge capacity of 39798 cubic feet per second (1127 cubic metres per second).

Running Water Draw Site 1 Dam Compared to Four Famous American Dams

Running Water Draw Site 1 Dam
Curry, New Mexico
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 65 730 550 357 216
Length (Ft) 3,208 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 25,150 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 128 167,800 74,100 3,611 108,355

Running Water Draw Site 1 Dam Weather

Current Conditions at Running Water Draw Site 1 Dam

Failed to fetch current weather data.

7-Day Forecast for Running Water Draw Site 1 Dam

Failed to fetch weather forecast data.

Running Water Draw Site 1 Dam Frequently Asked Questions

In which state is the Running Water Draw Site 1 Dam?

Running Water Draw Site 1 Dam is in New Mexico.

In which county is the Running Water Draw Site 1 Dam?

Running Water Draw Site 1 Dam is in Curry County.

How high is the Running Water Draw Site 1 Dam?

Running Water Draw Site 1 Dam is 65 feet high.

How long is the Running Water Draw Site 1 Dam?

Running Water Draw Site 1 Dam is 3,208 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG