Sumner Dam, New Mexico, USA

Home / USA / New Mexico / Sumner Dam

Quick Facts About Sumner Dam

Location: De Baca, New Mexico
Coordinates: 34.6074, -104.3898
River: Pecos River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1936
Dam Height: 164 ft (50 m)
Dam Length: 3,084 ft (940 m)
Dam Capacity: 227,683 acre-ft (280,842 Ml)
Condition Assessment: Not Available

Sumner Dam Map

Here is a map of Sumner Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Sumner Dam Information

Sumner Dam is an earthen embankment dam located about 20 miles from Fort Sumner, De Baca, New Mexico.

The dam, which is on the Pecos River, was primarily built for Flood Risk Reduction purposes, but also serves for Irrigation benefits.

The dam was designed by O.L. RICE and commissioned in 1936 and is currently owned by US Bureau of Reclamation.

Sumner Dam Structure

The Sumner Dam is approximately 3,084 feet (940 m) long, 164 feet (50 m) high and has a structural volume of 2,250,000 cubic yards (1,720,249 cubic metres).

Sumner Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 63,690 acre-ft (78,560 Ml) and maximum capacity of 227,683 acre-ft (280,842 Ml).

The surface area of the reservoir is 7,615 acres (3,082 ha) and the total catchment area is 1,960 square miles (5,076 square kilometres).

Sumner Dam Spillway

The dam has a 139 feet (42 m) wide controlled spillway with a maximum discharge capacity of 206000 cubic feet per second (5833 cubic metres per second).

Sumner Dam Compared to Four Famous American Dams

Sumner Dam
De Baca, New Mexico
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 164 730 550 357 216
Length (Ft) 3,084 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 227,683 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 1,960 167,800 74,100 3,611 108,355

Sumner Dam Weather

Current Conditions at Sumner Dam

Failed to fetch current weather data.

7-Day Forecast for Sumner Dam

Failed to fetch weather forecast data.

Sumner Dam Frequently Asked Questions

In which state is the Sumner Dam?

Sumner Dam is in New Mexico.

In which county is the Sumner Dam?

Sumner Dam is in De Baca County.

How high is the Sumner Dam?

Sumner Dam is 164 feet high.

How long is the Sumner Dam?

Sumner Dam is 3,084 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG