Upper Rio Hondo Site No. 1 Dam, New Mexico, USA

Home / USA / New Mexico / Upper Rio Hondo Site No. 1 Dam

Quick Facts About Upper Rio Hondo Site No. 1 Dam

Location: Lincoln, New Mexico
Coordinates: 33.533989, -105.480168
River: Salado Cr. & Gyp Spring Canyon River
Primary Purpose: Flood Risk Reduction
Type: Earth
Commissioned: 1959
Dam Height: 83 ft (25 m)
Dam Length: 690 ft (210 m)
Dam Capacity: 7,120 acre-ft (8,782 Ml)

Upper Rio Hondo Site No. 1 Dam Map

Here is a map of Upper Rio Hondo Site No. 1 Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Upper Rio Hondo Site No. 1 Dam Information

Upper Rio Hondo Site No. 1 Dam is an earthen embankment dam located in Lincoln, Lincoln, New Mexico.

The dam, which is on the Salado Cr. & Gyp Spring Canyon River, was primarily built for Flood Risk Reduction purposes, but also serves for Debris Control benefits.

The dam was designed by USDA NRCS and commissioned in 1959 and is currently owned by UPPER RIO HONDO SOIL & WATER CONSERVATION DISTRICT.

Upper Rio Hondo Site No. 1 Dam Structure

The Upper Rio Hondo Site No. 1 Dam is approximately 690 feet (210 m) long, 83 feet (25 m) high and has a structural volume of 0 cubic yards (0 cubic metres).

Upper Rio Hondo Site No. 1 Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 0 acre-ft (0 Ml) and maximum capacity of 7,120 acre-ft (8,782 Ml).

The surface area of the reservoir is acres (0 ha) and the total catchment area is 122 square miles (316 square kilometres).

Upper Rio Hondo Site No. 1 Dam Spillway

The dam has a 200 feet (61 m) wide uncontrolled spillway with a maximum discharge capacity of 13200 cubic feet per second (374 cubic metres per second).

Upper Rio Hondo Site No. 1 Dam Compared to Four Famous American Dams

Upper Rio Hondo Site No. 1 Dam
Lincoln, New Mexico
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 83 730 550 357 216
Length (Ft) 690 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,120 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 122 167,800 74,100 3,611 108,355

Upper Rio Hondo Site No. 1 Dam Weather

Current Conditions at Upper Rio Hondo Site No. 1 Dam

Failed to fetch current weather data.

7-Day Forecast for Upper Rio Hondo Site No. 1 Dam

Failed to fetch weather forecast data.

Upper Rio Hondo Site No. 1 Dam Frequently Asked Questions

In which state is the Upper Rio Hondo Site No. 1 Dam?

Upper Rio Hondo Site No. 1 Dam is in New Mexico.

In which county is the Upper Rio Hondo Site No. 1 Dam?

Upper Rio Hondo Site No. 1 Dam is in Lincoln County.

How high is the Upper Rio Hondo Site No. 1 Dam?

Upper Rio Hondo Site No. 1 Dam is 83 feet high.

How long is the Upper Rio Hondo Site No. 1 Dam?

Upper Rio Hondo Site No. 1 Dam is 690 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG