Alpina Dam, New York, USA

Home / USA / New York / Alpina Dam

Quick Facts About Alpina Dam

Location: Lewis, New York
Coordinates: 44.170556, -75.4319444
River: Bonaparte Creek River
Primary Purpose: Other
Type: Concrete
Commissioned: 1933
Dam Height: 7 ft (2 m)
Dam Length: 120 ft (37 m)
Dam Capacity: 39,739 acre-ft (49,017 Ml)

Alpina Dam Map

Here is a map of Alpina Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Alpina Dam Information

Alpina Dam is a concrete dam located in Ft Drum Military Rsrvtn, Lewis, New York.

The dam, which is on the Bonaparte Creek River, was primarily built for Other purposes, but also serves for benefits.

The dam was designed by and commissioned in 1933 and is currently owned by NIAGARA MOHAWK POWER CORPORATION.

Alpina Dam Structure

The Alpina Dam is approximately 120 feet (37 m) long, 7 feet (2 m) high and has a structural volume of cubic yards (0 cubic metres).

Alpina Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 39,739 acre-ft (49,017 Ml) and maximum capacity of 39,739 acre-ft (49,017 Ml).

The surface area of the reservoir is 1,286 acres (520 ha) and the total catchment area is 18 square miles (48 square kilometres).

Alpina Dam Spillway

The dam has a 63 feet (19 m) wide controlled spillway with a maximum discharge capacity of 412 cubic feet per second (12 cubic metres per second).

Alpina Dam Compared to Four Famous American Dams

Alpina Dam
Lewis, New York
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 7 730 550 357 216
Length (Ft) 120 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 39,739 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 18 167,800 74,100 3,611 108,355

Alpina Dam Weather

Current Conditions at Alpina Dam

Failed to fetch current weather data.

7-Day Forecast for Alpina Dam

Failed to fetch weather forecast data.

Alpina Dam Frequently Asked Questions

In which state is the Alpina Dam?

Alpina Dam is in New York.

In which county is the Alpina Dam?

Alpina Dam is in Lewis County.

How high is the Alpina Dam?

Alpina Dam is 7 feet high.

How long is the Alpina Dam?

Alpina Dam is 120 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG