Downsville Dam, New York, USA

Home / USA / New York / Downsville Dam

Quick Facts About Downsville Dam

Location: Delaware, New York
Coordinates: 42.074167, -74.9661111
River: East Branch Delaware River
Primary Purpose: Water Supply
Type: Earth
Commissioned: 1954
Dam Height: 204 ft (62 m)
Dam Length: 2,400 ft (732 m)
Dam Capacity: 609,740 acre-ft (752,102 Ml)
Condition Assessment: Satisfactory

Downsville Dam Map

Here is a map of Downsville Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Downsville Dam Information

Downsville Dam is an earthen embankment dam located about 1 miles from Downsville, Delaware, New York.

The dam, which is on the East Branch Delaware River, was primarily built for Water Supply purposes, but also serves for benefits.

The dam was designed by and commissioned in 1954 and is currently owned by NYCDEP DAMS WEST OF THE HUDSON RIVER.

Downsville Dam Structure

The Downsville Dam is approximately 2,400 feet (732 m) long, 204 feet (62 m) high and has a structural volume of cubic yards (0 cubic metres).

Downsville Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 420,280 acre-ft (518,407 Ml) and maximum capacity of 609,740 acre-ft (752,102 Ml).

The surface area of the reservoir is 5,763 acres (2,332 ha) and the total catchment area is 372 square miles (963 square kilometres).

Downsville Dam Spillway

The dam has a 800 feet (244 m) wide uncontrolled spillway with a maximum discharge capacity of 200000 cubic feet per second (5663 cubic metres per second).

Downsville Dam Compared to Four Famous American Dams

Downsville Dam
Delaware, New York
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 204 730 550 357 216
Length (Ft) 2,400 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 609,740 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 372 167,800 74,100 3,611 108,355

Downsville Dam Weather

Current Conditions at Downsville Dam

Failed to fetch current weather data.

7-Day Forecast for Downsville Dam

Failed to fetch weather forecast data.

Downsville Dam Frequently Asked Questions

In which state is the Downsville Dam?

Downsville Dam is in New York.

In which county is the Downsville Dam?

Downsville Dam is in Delaware County.

How high is the Downsville Dam?

Downsville Dam is 204 feet high.

How long is the Downsville Dam?

Downsville Dam is 2,400 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG