Eaton Brook Reservoir Dam, New York, USA

Home / USA / New York / Eaton Brook Reservoir Dam

Quick Facts About Eaton Brook Reservoir Dam

Location: Madison, New York
Coordinates: 42.864444, -75.6869444
River: Eaton Brook River
Primary Purpose: Navigation
Type: Earth
Commissioned: 1893
Dam Height: 58 ft (18 m)
Dam Length: 820 ft (250 m)
Dam Capacity: 7,886 acre-ft (9,727 Ml)

Eaton Brook Reservoir Dam Map

Here is a map of Eaton Brook Reservoir Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Eaton Brook Reservoir Dam Information

Eaton Brook Reservoir Dam is an earthen embankment dam located about 2 miles from West Eaton, Madison, New York.

The dam, which is on the Eaton Brook River, was primarily built for Navigation purposes, but also serves for Recreation benefits.

The dam was designed by and commissioned in 1893 and is currently owned by New York State Canal Corporation.

Eaton Brook Reservoir Dam Structure

The Eaton Brook Reservoir Dam is approximately 820 feet (250 m) long, 58 feet (18 m) high and has a structural volume of cubic yards (0 cubic metres).

Eaton Brook Reservoir Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,714 acre-ft (7,048 Ml) and maximum capacity of 7,886 acre-ft (9,727 Ml).

The surface area of the reservoir is 275 acres (111 ha) and the total catchment area is 8 square miles (21 square kilometres).

Eaton Brook Reservoir Dam Spillway

The dam has a 41 feet (12 m) wide uncontrolled spillway with a maximum discharge capacity of 3060 cubic feet per second (87 cubic metres per second).

Eaton Brook Reservoir Dam Compared to Four Famous American Dams

Eaton Brook Reservoir Dam
Madison, New York
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 58 730 550 357 216
Length (Ft) 820 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 7,886 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 8 167,800 74,100 3,611 108,355

Eaton Brook Reservoir Dam Weather

Current Conditions at Eaton Brook Reservoir Dam

Failed to fetch current weather data.

7-Day Forecast for Eaton Brook Reservoir Dam

Failed to fetch weather forecast data.

Eaton Brook Reservoir Dam Frequently Asked Questions

In which state is the Eaton Brook Reservoir Dam?

Eaton Brook Reservoir Dam is in New York.

In which county is the Eaton Brook Reservoir Dam?

Eaton Brook Reservoir Dam is in Madison County.

How high is the Eaton Brook Reservoir Dam?

Eaton Brook Reservoir Dam is 58 feet high.

How long is the Eaton Brook Reservoir Dam?

Eaton Brook Reservoir Dam is 820 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG