Lock E10 Cranesville Dam, New York, USA

Home / USA / New York / Lock E10 Cranesville Dam

Quick Facts About Lock E10 Cranesville Dam

Location: Montgomery, New York
Coordinates: 42.9178, -74.1408
River: Mohawk River (Erie Canal)
Primary Purpose: Hydroelectric
Type: Other
Commissioned: 1910
Dam Height: 15 ft (5 m)
Dam Length: 500 ft (152 m)
Dam Capacity: 5,661 acre-ft (6,983 Ml)

Lock E10 Cranesville Dam Map

Here is a map of Lock E10 Cranesville Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Lock E10 Cranesville Dam Information

Lock E10 Cranesville Dam is an other dam located in Cranesville, Montgomery, New York.

The dam, which is on the Mohawk River (Erie Canal), was primarily built for Hydroelectric purposes, but also serves for Navigation benefits.

The dam was designed by and commissioned in 1910 and is currently owned by New York State Canal Corporation.

Lock E10 Cranesville Dam Structure

The Lock E10 Cranesville Dam is approximately 500 feet (152 m) long, 15 feet (5 m) high and has a structural volume of cubic yards (0 cubic metres).

Lock E10 Cranesville Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 5,661 acre-ft (6,983 Ml) and maximum capacity of 5,661 acre-ft (6,983 Ml).

The surface area of the reservoir is 414 acres (168 ha) and the total catchment area is 3,210 square miles (8,314 square kilometres).

Lock E10 Cranesville Dam Spillway

The dam has a 480 feet (146 m) wide controlled spillway with a maximum discharge capacity of cubic feet per second (0 cubic metres per second).

Lock E10 Cranesville Dam Compared to Four Famous American Dams

Lock E10 Cranesville Dam
Montgomery, New York
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 15 730 550 357 216
Length (Ft) 500 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,661 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 3,210 167,800 74,100 3,611 108,355

Lock E10 Cranesville Dam Weather

Current Conditions at Lock E10 Cranesville Dam

Failed to fetch current weather data.

7-Day Forecast for Lock E10 Cranesville Dam

Failed to fetch weather forecast data.

Lock E10 Cranesville Dam Frequently Asked Questions

In which state is the Lock E10 Cranesville Dam?

Lock E10 Cranesville Dam is in New York.

In which county is the Lock E10 Cranesville Dam?

Lock E10 Cranesville Dam is in Montgomery County.

How high is the Lock E10 Cranesville Dam?

Lock E10 Cranesville Dam is 15 feet high.

How long is the Lock E10 Cranesville Dam?

Lock E10 Cranesville Dam is 500 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG