Cowans Ford Dam

Cowans Ford Dam Quick Facts

Location: Mecklenburg, North Carolina
Coordinates: 35.435, -80.957732
River: Catawba River
Primary Purpose: Hydroelectric
Type: Concrete Earth
Commissioned: 1963
Dam Height: 134 ft (41 m)
Dam Length: 8,738 ft (2,663 m)
Dam Capacity: 414,100 acre-ft (510,784 Ml)
Condition Assessment: Satisfactory
Share Cowans Ford Dam:

Cowans Ford Dam Map

Cowans Ford Dam Information

Cowans Ford Dam is a concrete earth dam located about 16 miles from Mount Holly, Mecklenburg, North Carolina.

The dam, which is on the Catawba River, was primarily built for Hydroelectric purposes, but also serves for Recreation and Water Supply benefits.

The dam was designed by DUKE POWER COMPANY and commissioned in 1963 and is currently owned by Duke Energy.

Cowans Ford Dam Structure

The Cowans Ford Dam is approximately 8,738 feet (2,663 m) long, 134 feet (41 m) high and has a structural volume of cubic yards (0 cubic metres).

Cowans Ford Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 414,100 acre-ft (510,784 Ml) and maximum capacity of 414,100 acre-ft (510,784 Ml).

The surface area of the reservoir is 32,510 acres (13,156 ha) and the total catchment area is 1,790 square miles (4,636 square kilometres).

Cowans Ford Dam Spillway

The dam has a 465 feet (142 m) wide controlled spillway with a maximum discharge capacity of 225612 cubic feet per second (6389 cubic metres per second).

Cowans Ford Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Cowans Ford Dam
Mecklenburg, North Carolina
Height (ft)
134
Length (Ft)
8,738
Storage Volume (acre-ft)
414,100
Drainage Area (sq miles)
1,790
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Cowans Ford Dam Weather

Current Conditions at Cowans Ford Dam

Failed to fetch current weather data.

7-Day Forecast for Cowans Ford Dam

Failed to fetch weather forecast data.

Cowans Ford Dam Frequently Asked Questions

In which state is the Cowans Ford Dam?

Cowans Ford Dam is in North Carolina.

In which county is the Cowans Ford Dam?

Cowans Ford Dam is in Mecklenburg County.

How high is the Cowans Ford Dam?

Cowans Ford Dam is 134 feet high.

How long is the Cowans Ford Dam?

Cowans Ford Dam is 8,738 feet long.

Share Cowans Ford Dam:

More Dams in Mecklenburg County:

Cowans Ford Dam

More Dams in North Carolina:

Apalachia Dam
B. Everett Jordan Dam
Bear Creek Dam
Blewett Falls Dam
Catawba Dam
Cedar Cliff Dam
Chatuge Dam
Cheoah Dam
Cowans Ford Dam
Falls Lake Dam
Fontana Dam
Gaston Dam
High Rock Dam
Hiwassee Dam
Lookout Shoals Dam
Mountain Island Dam
Nantahala Dam
Oxford Dam
Rhodhiss Dam
Roanoke Rapids Dam
Santeetlah Dam
Shearon Harris Auxiliary Reservoir Dam
Thorpe Dam
Tillery Dam
Tuckertown Dam
Walters Dam
Yadkin Narrows Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG