Hiwassee Dam

Hiwassee Dam Quick Facts

Location: Cherokee, North Carolina
Coordinates: 35.15152, -84.177562
River: Hiwassee River
Primary Purpose: Flood Risk Reduction
Type: Concrete Gravity
Commissioned: 1940
Dam Height: 248 ft (76 m)
Dam Length: 1,376 ft (419 m)
Dam Capacity: 471,954 acre-ft (582,146 Ml)
Condition Assessment: Not Available
Share Hiwassee Dam:

Hiwassee Dam Map

Hiwassee Dam Information

Hiwassee Dam is a concrete gravity dam located about 28 miles from Reliance, Cherokee, North Carolina.

The dam, which is on the Hiwassee River, was primarily built for Flood Risk Reduction purposes, but also serves for Navigation, Recreation and Hydroelectric benefits.

The dam was designed by TVA and commissioned in 1940 and is currently owned by TVA.

Hiwassee Dam Structure

The Hiwassee Dam is approximately 1,376 feet (419 m) long, 248 feet (76 m) high and has a structural volume of 800,800 cubic yards (612,256 cubic metres).

Hiwassee Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 398,583 acre-ft (491,644 Ml) and maximum capacity of 471,954 acre-ft (582,146 Ml).

The surface area of the reservoir is 5,870 acres (2,376 ha) and the total catchment area is 968 square miles (2,507 square kilometres).

Hiwassee Dam Spillway

The dam has a 224 feet (68 m) wide controlled spillway with a maximum discharge capacity of 149000 cubic feet per second (4219 cubic metres per second).

Hiwassee Dam Compared to Five Famous American Dams

Height (ft)
Length (Ft)
Storage Volume (acre-ft)
Drainage Area (sq miles)
 
Hiwassee Dam
Cherokee, North Carolina
Height (ft)
248
Length (Ft)
1,376
Storage Volume (acre-ft)
471,954
Drainage Area (sq miles)
968
Hoover Dam
Clark County, Nevada
Height (ft)
730
Length (Ft)
1,244
Storage Volume (acre-ft)
30,237,000
Drainage Area (sq miles)
167,800
Grand Coulee Dam
Okanogan County, Washington
Height (ft)
550
Length (Ft)
5,673
Storage Volume (acre-ft)
9,562,0000
Drainage Area (sq miles)
74,100
Theodore Roosevelt Dam
Maricopa County, Arizona
Height (ft)
357
Length (Ft)
1,208
Storage Volume (acre-ft)
3,411,500
Drainage Area (sq miles)
5,736
Oroville Dam
Butte County, California
Height (ft)
235
Length (Ft)
6,920
Storage Volume (acre-ft)
3,540,000
Drainage Area (sq miles)
3,611
Glen Canyon Dam
Coconino County, Arizona
Height (ft)
216
Length (Ft)
1,565
Storage Volume (acre-ft)
29,875,000
Drainage Area (sq miles)
108,355

Hiwassee Dam Weather

Current Conditions at Hiwassee Dam

Failed to fetch current weather data.

7-Day Forecast for Hiwassee Dam

Failed to fetch weather forecast data.

Hiwassee Dam Frequently Asked Questions

In which state is the Hiwassee Dam?

Hiwassee Dam is in North Carolina.

In which county is the Hiwassee Dam?

Hiwassee Dam is in Cherokee County.

How high is the Hiwassee Dam?

Hiwassee Dam is 248 feet high.

How long is the Hiwassee Dam?

Hiwassee Dam is 1,376 feet long.

Share Hiwassee Dam:

More Dams in Cherokee County:

Apalachia Dam
Blackburn Crossing Dam
Buckner Dam
Hickory Log Reservoir Dam
Hiwassee Dam
Lake Arrowhead Dam
Lake Whelchel Dam
Lee Nuclear Dam 1
Lowell Power Plant Spillway Dam
Riverton Bypass Spillway Dam
Terrapin Creek W/S Dam Site 8
Weiss - Main Dam

More Dams in North Carolina:

Apalachia Dam
B. Everett Jordan Dam
Bear Creek Dam
Blewett Falls Dam
Catawba Dam
Cedar Cliff Dam
Chatuge Dam
Cheoah Dam
Cowans Ford Dam
Falls Lake Dam
Fontana Dam
Gaston Dam
High Rock Dam
Hiwassee Dam
Lookout Shoals Dam
Mountain Island Dam
Nantahala Dam
Oxford Dam
Rhodhiss Dam
Roanoke Rapids Dam
Santeetlah Dam
Shearon Harris Auxiliary Reservoir Dam
Thorpe Dam
Tillery Dam
Tuckertown Dam
Walters Dam
Yadkin Narrows Dam

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG